scanning tunneling microscope(redirected from Scanning tunneling microscopy)
Also found in: Dictionary, Acronyms.
scanning tunneling microscope(STM), device for studying and imaging individual atoms on the surfaces of materials. The instrument was invented in the early 1980s by Gerd BinnigBinnig, Gerd
, 1947–, German physicist, Ph.D. Univ. of Frankfurt, 1978. At the IBM Research Laboratory in Zürich, Binnig and fellow researcher Heinrich Rohrer built the first scanning tunneling microscope, an instrument so sensitive that it can distinguish individual
..... Click the link for more information. and Heinrich RohrerRohrer, Heinrich,
1933–2013, Swiss physicist, Ph.D. Swiss Federal Institute of Technology, 1960. He joined IBM in 1963 and spent almost his entire career with the company, retiring in 1997.
..... Click the link for more information. , who were awarded the 1986 Nobel prize in physics for their work. The underlying principle of the STM is the tunnelingtunneling,
quantum-mechanical effect by which a particle can penetrate a barrier into a region of space that would be forbidden by ordinary classical mechanics. Tunneling is a direct result of the wavelike properties of particles; the wave associated with a particle "decays"
..... Click the link for more information. of electrons between the sharp tip of a probe and the surface of the sample under study. The flow of electrons is extremely sensitive to the distance between the tip and the sample. As the tip is swept over the surface the height of the tip is continually adjusted so as to keep the flow of electrons constant. A map of the "bumps" on the surface is then obtained by accurately recording the height fluctuations of the tip. The STM was used in 2004 to measure the charges of individual atoms, and in 2010 researchers used a modified STM to observe the magnetism, or spin, of atoms on the nanosecond timescale.
Scanning tunneling microscope
An instrument for producing surface images with atomic-scale lateral resolution, in which a fine probe tip is scanned over the surface at a distance of 0.5–1 nanometer, and the resulting tunneling current, or the position of the tip required to maintain a constant tunneling current, is monitored.
Scanning tunneling microscopes have pointed electrodes that are scanned over the surface of a conducting specimen, with help from a piezoelectric crystal whose dimensions can be altered electronically. They normally generate images by holding the current between the tip of the electrode and the specimen at some constant (set-point) value by using a piezoelectric crystal to adjust the distance between the tip and the specimen surface, while the tip is piezoelectrically scanned in a raster pattern over the region of specimen surface being imaged. By holding the force, rather than the electric current, between tip and specimen at a set-point value, atomic force microscopes similarly allow the exploration of nonconducting specimens. In either case, when the height of the tip is plotted as a function of its lateral position over the specimen, an image that looks very much like the surface topography results.
It is becoming increasingly possible to record other signals (such as lateral force, capacitance, scan-related tip displacement, temperature, light intensity, or magnetic resonance) as the tip scans. For example, modern atomic force microscopes can map lateral force and conductivity along with height, while image pairs from scanning tunneling microscopes scanning to and fro can provide information about friction as well as topography.
Scanning tunneling microscopes make it possible not just to view atoms but to push them and even to rearrange them in unlikely combinations (sometimes whether or not these rearrangements are desirable). A few considerations of scale are important in understanding this process. Atoms comprise a positive nucleus and a surrounding cloud of negative electrons. These charges rearrange when another atom approaches, with unlike charges shifting to give rise to the van der Waals force of attraction between neutral atoms. This force makes gravity (and most accelerations) ignorable when contact between solid objects in the micrometer size range and smaller is involved, since surface-to-volume ratios are inversely proportional to object size.
The electric field in the scanning tunneling microscope allows plucking as well, in which adsorbed or substrate atoms are removed and transferred to the electrode tip with a suitable voltage pulse. Because the electric field from the tip falls off less rapidly with separation than do van der Waals forces, the most weakly attached nearby atom rather than the nearest may end up being removed. One solution to this problem is a hybrid approach. By invoking the tip electric field for bond breaking only when the tip is sufficiently close to the target atom that the van der Waals forces contribute as well, atoms on silicon could be singly removed and redeposited at will.
A third kind of selective bond breaking was also demonstrated. It involved the selective breaking of silicon-hydrogen bonds using electron energies (that is, pulse voltages) below those necessary to break bonds directly. Since the desorption probability was observed to vary exponentially with the tip-specimen current, it is believed that vibrational heating from inelastic electron tunneling mediated the chemical transition in this work. This work involves bond alteration at the level of signal atoms, the ultimate frontier for lithographic miniaturization.