Schlieren photography

(redirected from Schlieren photograph)

Schlieren photography

Any technique for the photographic recording of schlieren, which are regions or stria in a medium that is surrounded by a medium of different refractive index. Refractive index gradients in transparent media cause light rays to bend (refract) in the direction of increasing refractive index. This is a result of the reduced light velocity in a higher-refractive-index material. This phenomenon is exploited in viewing the schlieren, with schlieren photographs as the result. Electronic video recorders, scanning diode array cameras, and holography are widely used as supplements. See Holography, Refraction of waves

There are many techniques for optically enhancing the appearance of the schlieren in an image of the field of interest. In the oldest of these, called the knife-edge method (see illustration), a point or slit source of light is collimated by a mirror and passed through a field of interest, after which a second mirror focuses the light, reimaging the point or slit where it is intercepted by an adjustable knife edge (commonly a razor blade). The illustration shows the “z” configuration which minimizes the coma aberration in the focus. Mirrors are most often used because of the absence of chromatic aberration. See Aberration (optics)

Knife-edge method of viewing schlieren, employing the “z” configurationenlarge picture
Knife-edge method of viewing schlieren, employing the “z” configuration

Rays of light that are bent by the schlieren in the direction of the knife edge are intercepted and removed from the final image of the region of interest, causing those regions to appear dark. Consequently, the system is most sensitive to the density gradients that are perpendicular to the knife edge. The knife edge is commonly mounted on a rotatable mount so that it can be adjusted during a measurement to optimally observe different gradients in the same field of interest. The intensity in the processed image is proportional to the refractive index gradient. A gradient in the same direction as the knife edge appears dark. Gradients in the opposite direction appear bright. This method, employed with arc light sources, is still one of the simplest ways to view refractive index changes in transparent solids, liquids, and gases. A well-designed schlieren system can easily detect the presence of a refractive index gradient that causes 1 arc-second deviation of a light ray.

Except for locating and identifying schlieren-causing events such as turbulent eddies, shock waves, and density gradients, schlieren systems are usually considered to be qualitative instruments. Quantitative techniques for determining density are possible but are much more difficult to employ. The most common of these is color schlieren. The knife edge is replaced with a multicolored filter. Rays of light refracted through different angles appear in different colors in the final image.

The availability of lasers and new optical components has expanded the method considerably. When a coherent light source such as a laser is used, the knife edge can be replaced by a variety of phase-, amplitude-, or polarization-modulating filters to produce useful transformations in the image intensity. See Interferometry, Laser, Polarized light

McGraw-Hill Concise Encyclopedia of Physics. © 2002 by The McGraw-Hill Companies, Inc.
Mentioned in ?
References in periodicals archive ?
Density gradient in the y direction was used to describe a Schlieren photograph and reconfigured flow field.
The numerical Schlieren photograph shows that the sideward jet flows in the shear layer exchanging with the flow after conical shock and circumfluence, rather than directly flowing into the circumfluence.
Caption: Figure 2: Flow field wave structure of spiked blunt body with spike length L/D = 1.0; (a) numerical Schlieren photograph; (b) experimental Schlieren photograph [20].
The Schlieren photograph in the case of the single injection is shown in Figure 10(a).
(a) Schlieren photograph with single injection at SJ1.
Schlieren photographs in the tandem configuration are shown in Figure 11.
Because shock waves represent a stark and sudden change in refractive index, they show up clearly in schlieren photographs.
Moreover, as shown in Figure 4 for the case of [[phi].sub.ov] = 1.0 and [[phi].sub.g] = 0.66, schlieren photographs revealed that the structure of these flames also oscillated between smooth and cellular.
Static pressure measurements along with high-speed Schlieren photographs were utilized to investigate the hypersonic airflow field along the 14-X B model.