Seismic Waves

(redirected from Seismic wave)
Also found in: Dictionary, Wikipedia.

Seismic Waves

 

oscillations propagating in the earth from the foci of earthquakes, explosions, and other sources. Near the foci of strong earthquakes, seismic waves have destructive force over a period of tenths of a second. At significant distances from the epicenters, seismic waves are elastic waves.

Figure 1. Block diagram of oscillations in a compressional wave (a) and a shear wave (b)

Compressional waves (P waves) transmit changes of volume in a medium; that is, they transmit compression and extension. Oscillations in such waves occur in the direction of propagation (Figure l, a). Shear waves (S waves) do not cause volumetric changes in the medium; they are oscillations of particles in a direction perpendicular to the direction of wave propagation (Figure l, b). At each moment and at each point in the medium, seismic oscillations satisfy the wave equations (for P and S waves). In a homogeneous, isotropic, elastic medium, the propagation velocities of compressional (a) and shear (b) waves are determined by the formulas

Here, k + (4/3)μ = λ + 2μ, k is the bulk modulus, and λ and μ are Lame constants; μ is referred to as the shear modulus. The velocity of compressional waves is greater than that of shear waves.

The following phenomenon is characteristic of the propagation of seismic waves (elastic waves in a solid medium): when such waves obliquely strike the boundary between media with different parameters (such as propagation velocities and densities) for a given type of wave (such as a compressional wave), reflected and refracted shear waves arise, in addition to reflected and refracted compressional waves (Figure 2). Surface waves arise in the earth near the surface of a boundary. When an inhomogeneous SH wave is propagated along a horizontal layer a Love wave arises. When a P wave strikes the plane of a boundary, reflected P and SV waves may arise in the layer. In this case, if α2> β2 > α1 > β1, where α1 and β1 are velocities in the layer and α2 and β2 are velocities in a nonadjacent medium, then the reflected SV wave for a small e1 possesses the property of total internal reflection, just as the reflected P wave does. As a result, Rayleigh waves form in the layer. Like Love waves, Rayleigh waves are dispersive of velocity. They arise in a half-space without stratification. Rayleigh waves do not disperse and their velocity c ≈ 0.9 β.

Figure 2. Reflection and refraction of P waves at a boundary

P and S waves are propagated from the source through the body of the earth and are called body waves. For a homogeneous and isotropic medium, their amplitude diminishes in inverse proportion to the distance. Surface waves propagate along the surface and possess an amplitude that diminishes in inverse proportion to the square root of the distance. For this reason, surface waves are dominant in terms of amplitude for oscillations from remote earthquakes.

As a result of changes in the properties of the earth with increasing depth, the propagation velocities of body waves also change; this brings about refraction of the waves in the earth’s interior.

Figure 3. Velocity of compressional (P) and shear (S) waves as a function of depth

Observations of the propagation of seismic waves made on the earth’s surface make it possible to study the structure of the earth. The relation between the propagation velocity of P and S waves and depth (Figure 3) has made it possible to identify a series of structural shells in the earth.

REFERENCES

Savarenskii, E. F., and D. P. Kirnos. Elementy seismologii seisomometrii, 2nd ed. Moscow, 1955.
Bullen, K. E. Vvedenie v teoreticheskuiu seismologiiu. Moscow, 1966. (Translated from English.)
Savarenskii, E. F. Seismicheskie volny. Moscow, 1972.
Brekhovskikh, L. M. Volny v sloistykh sredakh, 2nd ed. Moscow, 1973.

E. F. SAVARENSKII

References in periodicals archive ?
A number of possibilities have been suggested, inspired by the fact that - despite the monitoring stations detecting seismic waves - there was no corresponding earthquake felt that morning.
The team came to this theory after analyzing the movement of seismic waves or sound waves that are produced due to Earthquakes and Tsunamis and travel through the interior parts of our planet.
Simulations showed that two buildings with the same number of stories equidistant from the fault line and only roughly 3 miles apart can have a substantially different damage potential due to the differences in which seismic waves emanating from the fault merge together.
Inspired by a paper that proposed a correlation between such hotspots and the velocity of seismic waves moving through the Earth's interior, Matthew Jackson, geochemist at the University of California, Santa Barbara, teamed with the authors of the original paper--Thorsten Becker of the University of Texas, Austin, and Jasper Konter of the University of Hawaii, Honolulu--to show that only the hottest hotspots with the slowest wave velocity draw from the primitive reservoir formed early in the planefs history.
Seismic wave was applied with peak accelerations of 0.1 g, 0.2 g, 0.4 g, and 0.6 g in X direction and 2/3 of the X direction in Z direction.
To detect the seismic wave, we use the heterodyne laser interferometer system.
Therefore, seismologists omitted ambient seismic wave fields as seismic noise, and these wave fields were merely considered "ambient noise" in seismic observations.
A single earthquake simulation covers four dimensions: the three spatial dimensions of seismic wave propagation and the time dimension.
Sato modeled the seismic wave as a simple sine wave and assumed that the earthquake-induced water waves were generated by horizontal movement of a vertical wall, and then proposed a formula for the earthquake-induced water wave using analytical calculations as follows:
The pulse thumps the seafloor, producing seismic waves that penetrate deep into the planet.
Wavelet analysis method can combine the time domain and frequency domain analysis, to describe seismic wave signal time frequency localization properties.
The effects of the incident angle of the seismic wave, coherency loss, and wave travel on the transmission tower are investigated.