shock mount


Also found in: Wikipedia.

shock mount

[′shäk ‚mau̇nt]
(mechanical engineering)
A mount used with sensitive equipment to reduce or prevent transmission of shock motion to the equipment.

vibration isolator

vibration isolator (bonded-elastomeric type)
vibration isolator (coil-spring type)
A resilient support for machinery, piping, ductwork, etc., which may act as a source of vibration; designed to reduce the amount of vibration transmitted to the building structure.

shock mount

shock mountclick for a larger image
A shock-absorbing attachment device to ensure that there is minimum vibration transmitted when a component sensitive to vibration is mounted on a moving vehicle or engine. There are shock mounts for mounting an instrument on the instrument panel and mounting the engine to the airframe.
References in periodicals archive ?
We wanted to know more about two specific areas: how the front brake load affected the neck area of the frame and how a worst-case bump load impacted the shock mount areas of the frame and swing arm assembly," Seiter said.
The normal height of the mount under load is about 1 1/4 inches measured from the top of the shock mount to the top of the mounting base.
Even if a shock mount is efficient, lack of sufficient sway space could cause secondary collisions, which would have the same effect as having no shock attenuation.
Sabra som ssm-1 universal shock mount for microphones sku 421183 000000000.
Its tooling was used to produce the custom-made parts on Buchberger's race car, ranging from a 6061 16 aluminum adapter that's fitted between the transmission and the transfer case to steel trailing arm shock mounts.
Shock mounts distribute vibration evenly while keeping the attachment level, increasing stability and improving compaction efficiency.
Literature describes the company's dynamic testing that is performed on a vast array of rubber articles, including belts, biomedical components, bridge bearing pads, dynamic seals, engine mounts, exhaust hangers, shock mounts, tires, vibration isolators, etc.
If you have an RG-33L, RG-33 SOCOM, RG-33 HAGA, RG-33L Plus or HAGA Plus MRAP here's a shock about the bolts that attach shock mounts to leaf springs
Made from recyclable polypropylene with chrome undercarriage, and rubber shock mounts for a comfy seat.
Accessories including noise and dust filters, hose connectors, and shock mounts.
Floating on four rubber shock mounts on the chassis, the deluxe cabin reduces noise and vibration inside the driver compartment to extremely low levels of only 75dB(A).