Sound-Level Meter

(redirected from Sound level meter)
Also found in: Acronyms, Wikipedia.

sound-level meter

[′sau̇nd ¦lev·əl ‚mēd·ər]
(engineering)
An instrument used to measure noise and sound levels in a specified manner; the meter may be calibrated in decibels or volume units and includes a microphone, an amplifier, an output meter, and frequency-weighting networks.

Sound-Level Meter

 

a device for measuring loudness (of noise) objectively. A sound-level meter consists of a nondirectional microphone, an amplifier, corrective filters, a detector, and an indicating meter.

The overall circuit design is such that the meter’s characteristics approximate the properties of the human ear. The sensitivity of the ear is a function of the frequency of a sound, and this function varies with the intensity of the noise (or sound) being measured. Therefore, there are three sets of filters in a sound-level meter that provide the necessary contour of the frequency response at three loudness levels. Scale A conforms to the response for a low loudness level of —40 phons (it is used in the range 20 to 55 phons); scale B, for a medium loudness level of ~70 phons (55 to 85 phons); and scale C, for a high loudness level, 85 to 140 phons. The response at the high loudness level is uniform over a frequency band of 30 to 8,000 hertz.

Scale A is also used to measure the loudness level in decibels with the notation A, that is, dB(A), at any loudness level. The value of a sound level in dB(A) is used when rating loudness in industry, dwellings, and transportation facilities. The filters are switched manually according to the loudness level of the sound (or noise) being measured. The rectified signal from the square-law detector is averaged over a time interval corresponding to the time constant of the ear—approximately 50 to 60 milliseconds (the time interval in which two separate acoustic signals are perceived as a unified signal by the ear because of its time lag). The scale on the output meter is calibrated in decibels relative to a root-mean-square sound-pressure level of 2 × 10–5 Pa on one of the three aforementioned scales—A, B, or C.

A modern sound-level meter is a compact, portable instrument powered by self-contained dry batteries. The microphone, electronic circuitry, and indicating meter should be extremely stable with respect to variations in the temperature, humidity, and barometric pressure, as well as invariant with respect to time.

REFERENCES

Beranek, L. Akusticheskie izmereniia. Moscow, 1952. (Translated from English.)
Izmerenie shuma mashin i oborudovaniia. Moscow, 1968.

sound-level meter

An instrument for the measurement of noise levels and sound levels, whose characteristics are specified by the American National Standards Institute; the instrument includes a microphone, amplifier, an output meter, and three electrical networks (called weighting networkA, B, and C) which weight different frequency components differently.
References in periodicals archive ?
The sound level meter was used for measure noise level readings.
Noise measurements were taken following the prescribed method in the manual of the manufacturer of sound level meter.
Sound level meter readings were taken at distances of 25 and 2.
With the sound level meter placed on the music stand I got identical readings--this meant that an assistant was not needed to hold the meter near the ear.
After we obtained an significant lot of pieces, using sound spectral density of the process signal delivered by the sound level meter, using Sigma Plot 2000 software, Fig.
The sound level meter was positioned 5, 10, 25, and 50 feet from the bell apparatus.
The sound level meter contains a microphone, some attenuators to set the sensitivity and a meter calibrated in decibels.
Using a sound level meter, researchers first measured ambient sound pressure levels (SPLs), then measured the SPL of the stereo by pressing the earphone up against the meter's receiver.
Tenders are invited for Purchase of sound level meter, spectrum analyzer (lot # 1); generator of nitrogen and zero air (lot # 2)
Both instrument and calibrators come with calibration certificates as standard, documenting compliance with the latest IEC 61672 Sound Level Meter standard.
13, walking with our hand-held Extech Instruments digital sound level meter.
I then used the sound level meter to identify and mark volume settings for each phono preamp that would provide equal sound levels.