Steel stud

Steel stud

A bent steel sheet-metal stud with holes punched out in the widest face; used as interior framing for drywall construction.

steel stud

one type of steel square
An upright post or support (i.e., a stud) fabricated of sheet steel; usually one of many in constructing a stud partition.
References in periodicals archive ?
The survey also finds that 75% of the steel stud respondents report that volumes have been up over the past 60 days and trends throughout the third quarter of 2015 have been overwhelmingly positive.
3 series features a polished zinc die cast handle with steel stud or female bushing.
ASHRAE and IECC have prescriptively increased the required use of continuous insulation (ci) in steel stud exterior wall designs to reduce thermal bridging, where heat flows around the insulation by means of high conductivity attachments.
The second updated edition of Basic Model Railroad Benchwork offers beginners and experienced modelers a fine collection of details on model railroad benchwork, updating all pages, photos and drawings and adding new information on using extruded foam board and steel stud benchwork.
It includes keynote lectures and papers on a broad variety of topics, including: free water influence on the dynamic tensile behavior of concrete, numerical modeling of honeycomb energy dissipating materials, a multi-scale fracture model for quasi-brittle materials, the influence of loading rate on shear failure resistance of RC beams, a numerical simulation of a terrorist attack, composite steel stud blast panel design and experimental testing, and real scale experiments on rockfall protection barriers.
3 the device developed by the Tecnaria Company consists of a steel stud welded to a steel plate, which is, in turn, connected to the timber beam by means of two screws.
The steel stud construction eliminated wood framing, and the exterior siding is fiberboard that mimics historic lapboard and does not require painting for 50 years.
It consists of two primary component parts molded of 30 percent glass-filled polypropylene, held together by an embedded stainless steel stud and mounted between a check valve and flat fan nozzle.
In a recent test conducted by Omega Point Laboratories, a gypsum and steel stud wall assembly was exposed to fire for two hours followed by a hose-stream test.
These partitions require no screws or clips but use a patented design steel stud with roll formed panel/stud interlock which has a one hour fire rating.
Steel stud walls are constructed in place as opposed to building them on the floor and then raising them into place.
Instead of a regular flat recoil lug, the stainless synthetic action has a round steel stud projecting from the bottom front of the receiver.