To change LOP, use the supplied Allen-head T-wrench to remove the top and bottom buttpad screws.
Insert the T-wrench into the center hole in the buttpad, loosen the bolt, and slide the entire buttpad and spacer stack up or down in its track until the desired position is achieved.
Warne offers a $25 25-inch-pound T-wrench
that everyone should have at least two of: One on their bench and another in a range bag.
14 inch through hole diameter,steel, includes allen wrench, master; hardened top reversible jaws, set of mounting bolts and spring loaded t-wrench
, 1 each.
The Manson finish reamer is attached to a long-shanked T-wrench
to enable working through the action.
He realizes that he's missing a T-wrench by the watertight scuttle.
Why would it be better to leave the missing T-wrench fitting as is rather than "borrow" from another work center?
The clamp is secured to the table with a cap screw, but by simply rotating the T-wrench
it attains a clamping height of 4".
tested) Sights: Bead; red fiber optic (front) Stock: Synthetic, checker textured Finish: Black oxide (steel), hard- coat anodized (aluminum) Accessories: Chokes (IC, M, XFT), T-wrench
MSRP: $600 Manufacturer: Stoeger Industries 800-264-4962 stoegerindustries.
Once the retainer is in position, a standard T-wrench
is used to radially displace a pair of wedges equally spaced inside the body of the collet chuck.