100Base-T(redirected from T4)
Also found in: Dictionary, Thesaurus, Medical, Acronyms, Wikipedia.
100Base-TAn Ethernet standard that transmits at 100 Mbps. Introduced in 1995 and officially the IEEE 802.3u standard, it is a 100 Mbps version of 10Base-T (10 Mbps Ethernet). Like 10Base-T, 100Base-T is a shared media LAN when used with a hub (all nodes share the 100 Mbps) and 100 Mbps between each pair of nodes when used with a switch. All modern Ethernet devices are at least 10/100, supporting both 100Base-T and 10Base-T (see 10/100 adapter).
100Base-T, 100Base-T4 and 100Base-TX
100Base-T uses two pairs of wires in Category 5 UTP cable, while 100Base-TX requires two pairs in Category 6 cable. 100Base-T4 uses all four wire pairs in older Category 3 cables. See 10Base-T and 100Base-FX.
|"Twisted Pair" Ethernet|
|All stations in a 100Base-T Ethernet are wired to a central hub or switch using twisted pair wires and RJ-45 connectors.|
|The moniker "Fast Ethernet" has been used for 100Base-T since its inception. In 2013, this was a current product in Staples.|