rudder(redirected from Tail rudder)
Also found in: Dictionary, Thesaurus.
rudder,mechanism for steering an airplaneairplane,
heavier-than-air vehicle, mechanically driven and fitted with fixed wings that support it in flight through the dynamic action of the air.
..... Click the link for more information. or a ship. In ships it is a flat-surfaced structure hinged to the stern and controlled by a helm. When the ship is on a straight course, the rudder is in line with the vessel; if the rudder is turned to one side or the other it offers sufficient resistance to the water to deflect the stern, thus changing the direction of the ship. In earliest times, as in small boats today, a paddle or oar hand-operated at the stern served to turn a boat. Later, Greek and Roman vessels required two rudders, one at each end, in order to maintain course when the prow or stern lifted out of the water. Vikings placed the rudder not directly on the stern but on the right side near it; thus the term starboard (steerboard) is used for the right side of a vessel. By the early 14th cent. the stern rudder had generally replaced the side rudder, and in the latter half of the 19th cent. wooden rudders gave way to iron and steel. Large modern liners have rudders that are 60 ft (18 m) or more in height and weigh 100 tons.
in vessels, a device for maintaining the vessel on course and for turning the vessel while under way. The rudder is usually a slab (the blade of the rudder), which can rotate about its vertical axis (vertical rudder). When the rudder is turned from the straight position, its surfaces are subjected to hydrodynamic forces that shift the vessel from the trajectory of steady-state motion. The rudder blade is flat or streamlined.
Rudders may be of the simple, balanced, and semibalanced
type, depending on the position of the rudder blade in relation to its axis of rotation (see Figure 1). Less force is required to turn balanced rudders in comparison with simple rudders. A vessel’s maneuverability and controllability depend on the rudder’s characteristics, including area and shape. The rudder is usually located at the vessel’s stern; it may sometimes be mounted at the bow, for example, in ferryboats.
On some vessels, the rudder’s function is performed by deflection nozzles, which change the direction of the stream of water thrust back by the vessel’s propeller. Vessels with rotary-blade propellers can maneuver without the use of a rudder. In addition to vertical rudders, horizontal rudders (diving planes or diving rudders, used to control motion in a vertical plane) are installed on submarines. Rudders may also be equipped with a propeller on the blade in order to improve controllability at low speeds and for maneuvering at standstill.
E. G. LOGOVINOVICH