Transition piece

Transition piece

A sheet metal device shaped to form a transition from one shape of duct to different shape or size of duct.
Mentioned in ?
References in periodicals archive ?
Tenders are invited for Dismantling, Shifting of screw conveyor inside the mills, Re-erection including tie rods, Screw conveyor bearing housing and stuffing box and replacement of eroded feed pipe, Mixing box and transition piece with new spares, Replacement and rectification of screw conveyor removable shaft of unit-5&6 mills during annual overhaul period 2018-19.
To ensure the monopiles are sufficiently prepared for grouting and the installation of the transition pieces, Osbit's tool utilises 10 cleaning heads to prepare the monopile surface to fit the transition piece.
This is a style we would all snap up because it's practical, stylish and the perfect transition piece.
com) Winter warmer This belted wool blend coat is a great transition piece.
The Dutch contractor will install the project's 32 monopiles and transition piece foundations, supply and install the scour protection and provide the logistics between the fabrication ports in Germany, Denmark, the United Kingdom and the offshore wind farm.
Foundations consist of a monopile and a transition piece and the first of these was installed on August 8, 2012, using the heavy lift vessel, Stanislav Yudin.
Ballast Nedam has been commissioned to erect the project's 39 monopile and transition piece foundations and to provide the logistics between the feeder ports in Rostock and Lubmin and the Baltic 2 offshore wind farm.
The simple cardigan is the ultimate transition piece - it takes you from season to season as well as day to day.
In the June issue, in our Towns in Transition piece titled "Juneau," Juneau Mayor Bruce Botelho's name was misspelled.
When you're installing flooring up to an existing vinyl or wood floor, leave an expansion space between the floors and then nail a transition piece over the gap.
It uses a die with an adjustable gap and changes pipe diameter with a conical, 800-mm-long transition piece connecting the die to the calibrator.

Full browser ?