absorption test

absorption test

[əb′sȯrp·shən ‚test]
(immunology)
Analysis of the antigenic components of bacterial cells and large macromolecules by a series of precipitation or agglutination reactions with specific antibodies.
References in periodicals archive ?
Tenders are invited for Purchase Of Compression Resistance Tester With Attachment Of Nail Penetration And Energy Absorption Test Of Seat Region For Safety Shoes
Results of the absorption test of the intestinal wall by bisdemethoxycurcumin (BDMCur), demethoxycurcumin (DMCur) and curcumin (Cur).
Five (5) samples of each type of plaster were prepared according to ASTM C293-02 for flexural test and ASTM C373-88 for porosity and water absorption test.
The developed crumb rubber masonry blocks satisfied the ASTM non-load bearing requirements in addition to satisfying the water absorption test.
The chemical absorption test was carried out by the measurement of the weight difference between dry mass and surface dry mass after immersion in sodium hypochlorite solution (5.
Venkateshwaran et al [8] studied the tensile, flexural, impact and water absorption test were carried out using banana epoxy composite material.
On the other hand, in the surface absorption test (table 5), the sample D had the best performance with values significantly lower than the other samples.
03) and transverse-plane angular displacement for the axial torque absorption test (Figure 6; fixed offset = 0.
0 cm for absorption test of methylene blue and malachite green dye in single dye solution were studied.
The water absorption test was also conducted on same sample.