acrylonitrile copolymer

acrylonitrile copolymer

[‚ak·rə‚lō′nī·trəl kō′päl·ə·mər]
(organic chemistry)
Oil-resistant synthetic rubber made by polymerization of acrylonitrile with compounds such as butadiene or acrylic acid.
References in periodicals archive ?
This chapter considers the birth of the polyester industry, with the process of stretching and the uniaxial orientation of polyester fibre, which was a precursor to the biaxial orientation of film and bottles; the demise of Lopac (the Monsanto acrylonitrile copolymer), which gave PET an invaluable lead as the polymer for rigid bottles to replace glass; the development of the preform neck finish, initially based on a glass finish so that plastic closures suitable for carbonated beverage PET bottles could be used, and the further developments in both the materials and the technologies.
The possibility of confinement of various nanofillers (including MWNTs) at the interface of a binary blend has been addressed in detail in polycarbonate/styrene acrylonitrile copolymer (PC/SAN) blend based on the geometrical shape of the nanofiller by Goldel et al.
If you are saddled with a given die and required layflat, and are running stiff resins like nylon, acrylonitrile copolymer, or PC which run well only at very low BURs--you can reduce the area of cooling without reducing layflat width by increasing the diameter of the bubble where it exits the air ring.
- 250,000 t/y of ethylene, - 160,000 t/y of low-density polyethylene, - 55,000 t/y of ethylene glycol, - 20,000 t/y of ethylene oxide, - 100,000 t/y of polypropylene, - 70,000 t/y of butadiene, - 145,000 t/y of styrene monomer, - 80,000 t/y of polystyrene, - 80,000 t/y of styrene butadiene rubber (SBR) and polybutadiene rubber, - 60,000 t/y of MTBE, - 15,000 t/y of butene-1, - 15,000 t/y of acrylonitrile butadiene styrene (ABS), and - 5,000 of styrene acrylonitrile copolymer (SAC).
Based on this discipline, [alpha]-methylstyrene/styrene/ acrylonitrile copolymer (9), [alpha]-methylstyrene/acrylonitrile copolymer ([alpha]-MSAN) (10-13), chlorinated PVC (14), (15), imide polymers (16), (17) and styrene/maleic anhydride copolymer (18), (19) have already been reported.
It was to have the following capacities: - 250,000 t/y of ethylene, - 160,000 t/y of low-density polyethylene, - 55,000 t/y of ethylene glycol, - 20,000 t/y of ethylene oxide, - 100,000 t/y of polypropylene, - 70,000 t/y of butadiene, - 145,000 t/y of styrene monomer, - 80,000 t/y of polystyrene, - 80,000 t/y of styrene butadiene rubber (SBR) and polybutadiene rubber, - 60,000 t/y of MTBE, - 15,000 t/y of butene-1, - 15,000 t/y of acrylonitrile butadiene styrene (ABS), and - 5,000 of styrene acrylonitrile copolymer (SAC).
It was to have the following capacities: * 250,000 t/y of ethylene, * 160,000 t/y of low-density polyethylene, * 55,000 t/y of ethylene glycol, * 20,000 t/y of ethylene oxide, * 100,000 t/y of polypropylene, * 70,000 t/y of butadiene, * 145,000 t/y of styrene monomer, * 80,000 t/y of polystyrene, * 80,000 t/y of styrene butadiene rubber (SBR) and polybutadiene rubber, * 60,000 t/y of MTBE, * 15,000 t/y of butene-1, * 15,000 t/y of acrylonitrile butadiene styrene (ABS), and * 5,000 of styrene acrylonitrile copolymer (SAC).
It was to have the following capacities: - 420,000 t/y of ethylene, - 160,000 t/y of low-density polyethylene, - 55,000 t/y of ethylene glycol, - 20,000 t/y of ethylene oxide, - 100,000 t/y of polypropylene, - 70,000 t/y of butadiene, - 145,000 t/y of styrene monomer, - 80,000 t/y of polystyrene, - 80,000 t/y of styrene butadiene rubber (SBR) and polybutadiene rubber, - 60,000 t/y of MTBE, - 15,000 t/y of butene-1, - 15,000 t/y of acrylonitrile butadiene styrene (ABS), and - 5,000 of styrene acrylonitrile copolymer (SAC).
The films are currently available in PVC, PET, and Barex acrylonitrile copolymer.
The most significant achievement is the introduction of reactive carboxyl-terminated butadiene acrylonitrile copolymer (CTBN) into the epoxy matrix (1, 2).
Sinco demonstrated making 120-cc mascara bottles of acrylonitrile copolymer. The VK 100 costs $26,000 FOB the U.S.
SFP also has two single-cavity formers for customer trials and has molded other materials like ABS, filled PP, acrylonitrile copolymer and UHMWPE powder briquettes.