Electrical pulses lasting 20 millisec completely demagnetize the ALNICO magnet
when it is time to remove the mold.
From these four, ferrite and AlNiCo magnets
are the weakest in all the mentioned criteria, except the price, which is remarkably lower than in case of NdFeB or SmCo alloys.
Ferrite magnets are relatively cheaper than other permanent magnets such as NdFeB magnets, SmCO and Alnico magnets
and hence account for a relatively smaller revenue share in the overall market.
were the first type of permanent magnets to be used for biomedical purposes.
Alnico: One of the earliest magnet materials used for ferrous separation, Alnico magnets
are castings of aluminum, nickel, cobalt, and iron.
The Gamma 1 is a five-way horn design that comes with eight back-loaded bass horns that have 16 inch Alnico bass drivers; a low mid-range spherical wave horn; a mid-high spherical wave horn with one of the best two inch compression drivers and Alnico magnets
and a 0.
With the development of this new ferrite magnet and the move to mass production, NEOMAX enhances its product lineup and reinforces its position as the world's strongest and largest manufacturer of magnets, including rare-earth magnets, and alnico magnets
Their AlNiCo magnets
make these motors ideal for high-speed operation.
The magnetic power source for Eriez' dual-wrap drum separator, Erium 3000, is a high quality rare-earth permanent magnetic material, which develops magnetic fields up to 25 times stronger than conventional ceramic or alnico magnets
, with no increase in size.
These magnets have high-thermal-demagnetization coefficients compared with the traditional Alnico magnets
, so they are not used in high-thermal-ambient conditions.
They are permanent-magnet chucks that are controlled by sending electrical signals to a control magnet, which in effect short-circuits the other Alnico magnets
embedded in the chuck.
Thomas & Skinner is a leading manufacturer of cast and sintered alnico magnets
, magnet assemblies, and transformer laminations.