amorphous solid(redirected from amorphism)
Also found in: Dictionary, Thesaurus, Medical.
A rigid material whose structure lacks crystalline periodicity; that is, the pattern of its constituent atoms or molecules does not repeat periodically in three dimensions. In the present terminology amorphous and noncrystalline are synonymous. A solid is distinguished from its other amorphous counterparts (liquids and gases) by its viscosity: a material is considered solid (rigid) if its shear viscosity exceeds 1014.6 poise (1013.6 Pa · s). See Crystal, Viscosity
Oxide glasses, generally the silicates, are the most familiar amorphous solids. However, as a state of matter, amorphous solids are much more widespread than just the oxide glasses. There are both organic (for example, polyethylene and some hard candies) and inorganic (for example, the silicates) amorphous solids. Glasses can be prepared which span a broad range of physical properties. Dielectrics (for example, SiO2) have very low electrical conductivity and are optically transparent, hard, and brittle. Semiconductors (for example, As2SeTe2) have intermediate electrical conductivities and are optically opaque and brittle. Metallic glasses have high electrical and thermal conductivities, have metallic luster, and are ductile and strong.
The obvious uses for amorphous solids are as window glass, container glass, and the glassy polymers (plastics). Less widely recognized but nevertheless established technological uses include the dielectrics and protective coatings used in integrated circuits, and the active element in photocopying by xerography, which depends for its action upon photoconduction in an amorphous semiconductor. In optical communications a highly transparent dielectric glass in the form of a fiber is used as the transmission medium.
It is the changes in short-range order (on the scale of a localized electron), rather than the loss of long-range order alone, that have a profound effect on the properties of amorphous semiconductors. For example, the difference in resistivity between the crystalline and amorphous states for dielectrics and metals is always less than an order of magnitude and is generally less than a factor of 3. For semiconductors, however, resistivity changes of 10 orders of magnitude between the crystalline and amorphous states are not uncommon, and accompanying changes in optical properties can also be large.
One class of amorphous semiconductors is the glassy chalcogenides, which contain one (or more) of the chalcogens sulfur, selenium, or tellurium as major constituents. These materials have application in switching and memory devices. Another group is the tetrahedrally bonded amorphous solids, such as amorphous silicon and germanium. These materials cannot be formed by quenching from the melt (that is, as glasses) but must be prepared by one of the deposition techniques mentioned above.
When amorphous silicon (or germanium) is prepared by evaporation, not all bonding requirements are satisfied, so a large number of dangling bonds are introduced into the material. These dangling bonds create states deep in the gap which limit the transport properties. The number of dangling bonds can be reduced by a thermal anneal below the crystallization temperature, but the number cannot be reduced sufficiently to permit doping. See Semiconductor