Austenitic stainless steels have by far the greatest share in total stainless steel production.
The synthetic ash is highly accelerated hot corrosion of the
austenitic stainless steel and most of the weight loss at temperature (700[degrees]C to 950[degrees]C).This was due to formed vanadic compound like ([Na.sub.2]O.[V.sub.2][O.sub.5], NaVOs, [Na.sub.2]O.6[V.sub.2]O, and other vanadic compound .These compound tragically oxidized the alloy components acting as oxygen carries, metal oxide crashed or dissolving agents of protective oxide layer [8].
(2008): The study of high speed fine turning of
austenitic stainless steel. In: Journal of Achievements in Materials and Manufacturing Engineering, 27, pp.
[8]Hiroyuki Kokawa, Grain boundary Engineering, Application to
Austenitic stainless steel II, Materia Japan, 52-2(2013)pp.
Santella et al., "The development of alumina-forming
austenitic stainless steels for high-temperature structural use," JOM, vol.
Peleowo, "Effect of heat treatment on corrosion behaviour of
austenitic stainless steel in mild acid medium," in Proceedings of the International Conference on Chemical, Ecology and Environmental Sciences (ICCEES '2011), Pattaya, Thailand, December 2011.
Fill and cap passes were made with
austenitic stainless steel, so no evidence of carbon steel was visible to inspectors.
The forming limit curves for hot deep galvanized steel sheet DX54D and
austenitic stainless steel DIN 1.4301 were stated by experiments based on CCD video camera recording of notched specimens' tensile test.
The composition of AISI 316L
Austenitic stainless steel was determine by PMI (Positive Material identification) test method.
Within this study, a Fe-Cr-C-B complex alloy (fine microstructure with high hardphase content) and a standard
austenitic stainless steel (1.4841, Bohler H525) have been investigated.
Austenitic stainless steel is a grade of material that material that creates fear in the hearts of manufacturers.