automatic mold

automatic mold

[¦ȯd·ə¦mad·ik ′mōld]
(engineering)
A mold used in injection or compression molding of plastic objects so that repeated molding cycles are possible, including ejection, without manual assistance.
Mentioned in ?
References in periodicals archive ?
This upgrade now allows for automatic mold identification, in addition to cost-effective cavity pressure monitoring and 100% zero-defect parts quality, within plastics injection-molding applications, Kistler says.
* Automatic mold identification and cavity pressure monitoring.
9, 2012 (CENS) -- Consistently dedicated to development of turnkey solutions of automatic mold change systems, the Taiwan-based Forwell Precision Machinery Co., Ltd.
A new automatic mold unloading system for extracting freshly molded threaded parts from the cavities of an injection molder is now available.
We saw a real need for this new automatic mold line."
The redesigned clamp integrates a fully automatic mold height adjustment combined with an extremely short stroke cylinder to generate clamp tonnage, guaranteeing the fastest cycle time possible with a vertical machine, according to the company.
Promass also introduced the first EPP molding machine with automatic mold loading and unloading, adapting its automatic mold-change system for EPS to the more complex hook-ups and heavier molds for EPP.
The machines are built with RFID capability for automatic mold recipe set up with no changeover time.
Innovex is developing a fully automated system that includes automatic mold charging with preheated material.
* Summit Foundry Systems Inc., Fort Wayne, Ind., provides sand, casting handling and automatic mold handling systems, as well as turnkey foundry design projects.
The company's press system is a fully automatic mold handling system that opens and closes the molds.
1000 mm- 500 mm movable - The device must be lateral to the axis of rotation of at least + /- The mass of the device should not exceed 15,000 kg- The assembly of molds should be possible on both sides- The mold compound can be unilaterally up to 25000 Kgs- The total mass of the system must not exceed 40,000 kg- There is a very high bending and torsional stiffness required- The device must be mounted to the existing form of support system- It is a flexible automatic mold clamping principle required- After removing the device in the system must GroFi these are self-employed on booth feet

Full browser ?