bandstop filter


Also found in: Dictionary, Medical, Acronyms.
Related to bandstop filter: bandpass filter, Notch filter

bandstop filter

An electronic circuit that accepts a signal and attenuates (reduces) certain frequencies. For example, it may be used to eliminate hum in a line. See bandpass filter and notch filter.
Copyright © 1981-2019 by The Computer Language Company Inc. All Rights reserved. THIS DEFINITION IS FOR PERSONAL USE ONLY. All other reproduction is strictly prohibited without permission from the publisher.
Mentioned in ?
References in periodicals archive ?
Zheng, "A compact dual-band bandstop filter with defected microstrip slot," Journal of Electromagnetic Waves and Applications, Vol.
A novel miniaturized dual-band bandstop filter using dual-plane defected structures
A UWB bandstop filter using the D-CRLH-TL, which is consists of an "H"-shaped DGS and two stubs with rectangular patches, is proposed in this paper.
Novel dual-composite right/left-handed transmission line and its application to bandstop filter
Zhu, "New defected microstrip structure bandstop filter," PIERS Proceedings, 1471-1474, Suzhou, China, Sep.
Compact bandstop filter with multiple rejection zeros
There are many methods to achieve an elliptic or quasi-elliptic bandstop filter design [3-5].
Quasi-elliptic microstrip bandstop filter using tap coupled open-loop resonators
Thus, a dual narrow-band bandstop filter is constructed and its configuration is depicted in Fig.
Design of planar dual and triple narrowband bandstop filters with independently controlled stopbands and improved spurious response
In order to analyze the proposed dual-band bandstop filter in detail, comparison of the bandstop filter with normal arrayed and stagger arrayed DGS patterns is given in Fig.
New u-shaped DGS bandstop filters
A suitable application of the coupling matrix technique to bandstop filters expands the use of matrix operations beyond passband responses.
Direct coupling matrix synthesis of bandstop filters
We normalize the bandstop filter's center frequency at 1 GHz, and it leads to transmission zeros distributed by pairs symmetrically placed around the center frequency [f.sub.0].
A compact bandstop filter based on two meandered parallel-coupled lines
It is usually necessary to add either the lowpass or bandstop filter that can reject the spurious signals.
Size reduction and harmonic suppression of rat-race hybrid coupler using defected microstrip structure
Finally, an ideal bandstop filter with normal operating frequency (1 GHz) is designed, calculated, and discussed by using lossless transmission-line and coupled-line models.
A coupled-line band-stop filter with three-section transmission-line stubs and wide upper pass-band performance
The traditional methods include: a wide-band bandpass filter and a bandstop filter cascaded [1] and two different filters set in parallel [2].
Compact dual-band bandpass filter using folded SIR with two stubs for WLAN
There is no upper frequency limit for passing the sinusoidal signal from the bandstop filter. This happens because we have a large voltage drop on the resistance of potentiometer when Rpoten.
Design and Construction of Capacitors with the Use of Nano-Barium Titanate's (BaTi[O.sub.3]) Composite Materials

Encyclopedia browser ?
Full browser ?