bearing(redirected from bearing retainer)
Also found in: Dictionary, Thesaurus, Medical, Legal.
bearing,machine part designed to reduce frictionfriction,
resistance offered to the movement of one body past another body with which it is in contact. In certain situations friction is desired. Without friction the wheels of a locomotive could not "grip" the rails nor could power be transmitted by belts.
..... Click the link for more information. between moving parts or to support moving loads. There are two main kinds of bearings: the antifriction type, such as the roller bearing and the ball bearing, operating on the principle of rolling friction; and the plain, or sliding, type, such as the journal bearing and the thrust bearing, employing the principle of sliding friction. Roller bearings are either cylindrical or tapered (conical), depending upon the application; they overcome frictional resistance by a rolling contact and are suited to large, heavy assemblies. Ball bearings are usually found in light precision machinery where high speeds are maintained, friction being reduced by the rolling action of the hard steel balls. In both types the balls or rollers are caged in an angular grooved track, called a race, and the bearings are held in place by a frame, commonly called a pillow block or plummer block. Ball bearings or roller bearings reduce friction more than sliding bearings do. Other advantages of antifriction bearings include ability to operate at high speeds and easy lubrication.
A journal bearing usually consists of a split cylindrical shell of hard, strong metal held in a rigid support and an inner cylindrical part of soft metal, which holds a rotating shaft, or journal. A self-aligning journal bearing has a spherically shaped support that turns in a socket to adjust to movements of the shaft. Slight misalignment of the shaft can be accommodated in the ordinary journal bearing by wearing of the soft bearing material, often an alloy of tin or lead. Less frequently used are aluminum alloys, steel, cast iron, or a thin layer of silver covered with a thin coating of a soft bearing material. Ideally, a film of lubricant, normally oil, separates journal and bearing so that contact is prevented (see lubricationlubrication,
introduction of a substance between the contact surfaces of moving parts to reduce friction and to dissipate heat. A lubricant may be oil, grease, graphite, or any substance—gas, liquid, semisolid, or solid—that permits free action of mechanical devices
..... Click the link for more information. ). Bearings that are not split are called bushings.
A thrust bearing supports an axial load on a shaft, i.e., a force directed along a shaft's length. It may be a plate at the end of a shaft or a plate against which the collar on the shaft pushes. Large thrust bearings, such as those used to transmit the motive force of a ship's propeller from the shaft to the hull, have blocks that are separated from the collar on the shaft by wedge-shaped spaces filled with oil. Graphite bearings are used in high-temperature situations. Certain plastics make satisfactory self-lubricating bearings for low speeds and light loads and, if additionally lubricated, work at higher speeds and carry greater loads. Rubber and a naturally oily wood, lignum vitae, are used in water-lubricated bearings. Watches and other precision instruments have glass or sapphire pivot bearings. In gas-lubricated bearings a film of gas separates the bearings from the moving machine parts. Magnetic bearings employ magnetic repulsion to separate journal from bearing, reducing friction still further.
in navigation, the angle between the meridian plane of the observer and the vertical plane passing through the point of observation and the observed object. The bearing angle is the same as the azimuth. Bearings are designated as true, magnetic, or compass bearings, depending on the type of meridian from which they are reckoned.
There are several systems for taking bearings. In the circular method, lines of position are stated in degrees clockwise from the northerly meridian. In the semicircular method, lines of position can be read clockwise in degrees from the northerly and southerly meridians. The quadrant method states lines of position in terms of quadrants; that is, the bearing angle is read with respect to the northerly and southerly meridian clockwise and counterclockwise between the limits of 0° and 90°. The rhumb method is also used, in which bearings are taken by dividing the circle of the compass into 32 rhumbs and reading from the northerly meridian.
a shaft or axle support that fixes the position of a rotating or rocking part of a mechanism relative to the other parts. Bearings are classified according to the direction of loading as radial, taking loads perpendicular to the axis of the shaft; thrust, taking loads directed along the axis of the shaft; and radial-thrust, taking composite loads, mostly radial (thrust-radial bearings, taking mainly axial loads, are used less frequently). Bearings are also distinguished according to the type of friction as rolling-contact (the more common) and plain types.
ii. A surface that supports and reduces friction between two moving points.