bending strength

bending strength

The ability of a structural member to resist breakage when subject to one or more external forces that cause it to bend.
References in periodicals archive ?
The Group's wood processing procedure can improve the hardness, shrinkage and swelling rate, density, deformation resistance, cracking resistance, anti-corrosiveness, bending strength and elasticity of poplar wood.
In brief, three groups of experiments (basic characteristics, bending strength and shearing strength) were conducted overthreesections (upper, middle and bottom) of stalks with 10 samples for each group.
As well as improved handling properties, the innovative jet strips also feature significantly higher hardness, which has a positive effect on all mechanical properties such as scratch resistance, bending strength and service life.
To predict the weld bending strength of Al-SiC composite same method could be followed.
Made of high-grade aluminum platens and beams to provide maximum tensile and bending strength with minimum weight, the press is reportedly lightweight, durable and versatile, with complete availability of coverage for all splice lengths, fabric ply or steel cord.
Holes in the tension side and in the compression side resulted in a 15 to 20 percent reduction in bending strength, whereas a hole at the tension face resulted in about a 30 percent reduction in bending strength.
Sample characterization was carried out by examining water absorption, the bending strength and chemical absorption.
of replicates = 5 Table 3: Modulus of elasticity (MOE) bending strength on heat treated Gigantochloa levis.
2) Test of strength: compressive strength tests were carried out on 40 mm cube specimens and bending strength tests used 40 x 40 x 160 mm beam specimens, which were demolded 20 h after casting, cured in 23 [+ or -] 0.
Wormy chestnut has a low bending strength and a medium crushing strength.
With gLaserTrim, ultra-thin glass substrates, with smooth and strain-relieved edges, have been shown to achieve 500 MPa bending strength, much higher than the 300 MPa offered by competitive technologies.
Several variables including shear and bending strength, mass loss, inherent viscosity, etc.