bevel gear

(redirected from bevel gears)
Also found in: Dictionary, Thesaurus.

bevel gear

a gear having teeth cut into a conical surface known as the pitch zone. Two such gears mesh together to transmit power between two shafts at an angle to each other

bevel gear

[′bev·əl ‚gir]
(mechanical engineering)
One of a pair of gears used to connect two shafts whose axes intersect.

bevel gear

bevel gear
A pair of toothed wheels with teeth cut on a surface at an angle other than 90° to the axis of the shaft on which the wheels are mounted. Bevel gear permits one shaft to drive another shaft that is not parallel to it.
References in periodicals archive ?
On straight and spiral bevel gears, the shafts must be perpendicular to each other, but they must also be in the same plane.
Global Synthesis for Face Milled Spiral Bevel Gears with Zero Transmission Errors, Beijing, China: Beihang University (in Chinese).
The present work bridges this gap through development of the ECH process for improving surface finish and surface integrity of the straight bevel gears and experimental investigations on the process performance.
The toughest part of this job--and there were many tough parts--was to get the shaft keyways aligned properly in orientation to the surfaces of the spiral bevel gears.
Shaft 10 speed--the second output shaft--is the result of cylindrical gears 5 and 6 speed difference fixed with bevel gears 7.
The Von Mises stress plots for various symmetric spur bevel gears obtained using ANSYS software are shown in Fig.
Precision 20o pressure angle stainless steel bevel gears from Quality Transmission Components are stocked in 24 sizes in modules 1.
Contract notice: Delivery of spiral bevel gears for ctm and gtl.
com), a Germany-based transmission manufacturer, have developed a process that permits the pre-milling and milling operations to produce bevel gears and gear components on a five-axis machining center rather than on a dedicated gear-making machine.
The newly developed bevel gears are derived from modern hypoid technology in combination with planetary gears with helical gearing.
The M5414 construction uses A2 tool steel in the drive block and main bevel gears with 17-4 stainless steel in the spindle and worm gear housing.
MT Series bevel gears and thrust base housings are made of ductile iron.