blade angle

blade angle

blade angle
i. The angle the face of the propeller blade makes at any particular place with its plane of rotation. It is also the angle subtended by the chord of the propeller blade with the horizontal plane when the propeller is laid flat on its boss on this horizontal plane, its axis being vertical.
ii. The angular difference between the chord of the rotor blade and the plane of rotation. This angle may be altered by the pilot through movement of the collective lever or through the cyclic control.
References in periodicals archive ?
Rotary knife Q 25 143/63/53/30 1xstopniowy tools for mining machines Rotary knife Q 25 186/92/59/38 1xstopniowy tools for mining machines Rotary knife 2XSTOPNIOWY Q 25 140/65/65/38/30/H hardness of the working> = 54HRC layer with a thickness of> = 1 mm over a length of> = 30 mm blade angle 85ST Rotary knife Q 25 147/75/58/38 1xstopniowy tools for mining machines
He found that using a 47[degrees] blade angle would increase the head about twice of that obtained by radial blades at shut-off point [6].
Modify the squeegee blade angle from the conventional 60[degrees] to 45[degrees] for better aperture filling.
To overcome the problem of the blade angle changing as the blade wears, a radial-adjusted belt cleaner can be designed with a specially engineered curved blade, known as "CARP" for Constant Angle Radial Pressure.
It was found that blade angle had a major impact on performance, the impact of number of blades was dependent on the blades angle, while the distance from the injector had minimum impact in performance apart from Midcone pressure drop, where a mixer closer to the injector helped to reduce pressure drops.
As with the radial turbine, a number of assumptions were made regarding the anticipated Mach numbers, blade angle and geometries.
2 mm at blade angle [phi] = 0[degrees], which are the same as those of the experimental model.
The new D3K2, D4K2 and D5K2 track type tractors feature Slope-Assist, part of the Cat AccuGrade Ready attachment, which allows controllers to automatically maintain a pre-established blade angle for a consistent grade.
This range complements all modern, traditional and transitional decor setups and is available in an assortment of different Usha Striker fans gives superfast cooling owing to its high lift blade angle, speed and efficient air delivery functions.
Several blade functions are easily manipulated by fingertip controls, including blade angle, blade sensitivity and blade shake.
A stream processor analyzes the sensor readings to determine if the blade angle of attack needs to be adjusted for
The blade angle distributions in each 3D impeller (from the inlet to outlet of each impeller) have significant influence on the impeller flow characteristics and overall integrally-geared compressor performance and operation.