blade section

blade section

blade section
A cross section of a propeller blade that is perpendicular to the span of the blade.
References in periodicals archive ?
For the NACA 65A-010, the blade section parameters are listed in Figure 8.
where y is the radial distance from the rotor disc center to the blade section and [beta] is the blade pitch angle (see Figures 5 and 6).
Purchase of semifinished meat natural lumpy boneless frozen beef hip and blade section 1st grade packaged 5-7 kg.
8 control points are selected for each full blade section while 5 for each splitter blade section.
Two papers from the Aviation Key Laboratory of Science and Technology on Precision Manufacturing propose an optical triangulation method for measuring blade section and a fast calibration model for optical probe laser beams.
The original wind turbine blade section made of composite material was statically tested and modeled with model validation analysis [6, 7].
GK Machine's Switchblade Scraper is economical and extremely safe to operate.The recently patented design allows the scraper cutting edge and blade section to move forward and back to change the angle of the cutting blade.
Use scrap through the band saw and adjust the fence until the blade section will go snugly into the slot.
A blade section off a sickle bar mower that I welded onto an old hoe, 2replacing the worn manufactured blade, is just the ticket.
The ferrule screws into a 5-degree taper in the blade section, which centers and aligns the blades.
The gearbox had separated from its mountings due to the severe imbalance created by the separated blade section,' said the report.
In general, these traditional switches operate by moving a rectangular switching blade section inside a rectangular cavity.