boundary error

boundary error

An invalid value entered into an application. For example, if a number is higher or lower than a range of values or there are too many characters in a text entry, a boundary error occurs. See validity checking.
References in periodicals archive ?
We define a boundary error as any hypothesized boundary that is more than 100ms away from a true boundary, which is marked by hand in the test sample.
If there is only a single standard deviation to the symbol boundary ([sigma] = 1), then the probability of that boundary error is 3.5 x [10.sup.-1] or 35 percent.
The preceding analysis was simplified to examine only a single type of boundary error. In reality, as shown in Figure 11, errors can occur on both symbol boundaries, so a "two tailed" probability model is required.
For a specific measuring interval the values of the relative boundary error are to be found within the interval [0,6 / 0,2][%].
This is clearly illustrated by the rankings of the Inspect3D reconstructions which exhibit a higher boundary error than the other FBP reconstructions but performed best within the FBP group with respect to MSD.
Rick Perry signed legislation in June that created a Red River Boundary Commission to study - and possibly redraw - the border along Lake Texoma, bringing the pump station fully into Texas and fixing an unintentional boundary error that has caused headaches for water managers.
The influence from the same boundary error (truncation error and rounding error) on difference solving methods is illustrated in Figure 9.
For beginning boundary of type B story detection, the boundary error is about 1.5~2.5s only using silence detection in the experiment, the boundary error is about 0~0.5s if using silence and shot change point.
He attributed the delays in the implementation of the project to some changes in the massive earth-moving operations that arose from land boundary errors and illegal claimants.
Title companies can be offered access to these different layers of information so that they may detect significant boundary errors and possibly some easements and adverse possession rights.
If the application requires that extra precision, it is necessary to have two separate tables, one to account for clockwise boundary errors and another to account for counter clockwise errors.
Full browser ?