bulk strength

[¦bəlk ′streŋkth]

(mechanics)

The strength per unit volume of a solid.

bulk strength

The mechanical strength per unit volume of a solid.

References in periodicals archive ?

Its bulk strength and weight are also better than many metals, and it can be more readily molded into complex shapes.

New Report Available: Fiberglass Market - Trends & Forecast to 2020

These geometrical techniques address mechanisms that allow the bulk strength of the solid to exceed the failure criteria in the critical arching dimensions of the flow channel.

Overcoming hopper flow problems with inserts

In both categories, the insert's bulk strength is exceeded leading to complete failure and tool breakage.

Wear--what, why, how

The ultimate tensile strength of single-end-gated samples is referred to as bulk strength, while the failure strength of double-end-gated samples with weld lines will be called weld strength.

A high mold temperature prolongs the molten state of the polymer melt during the injection stage, enabling the melt to more easily fill the rest of the cavity, generally increasing the bulk strength, as well as the weld strength.

Weld lines in nylon 6 melt-blended nanocomposites

High bulk strength, 100% coupling and faster charging lead to more effective, and predictable, blasts, combined with consistently higher productivity.

Multiblend convenience for ECCI

The use of high bulk strength explosives, such as heavy AN/FO, and the realization of the associated direct and indirect cost savings, is becoming more common in the mining industry today.

Aluminum increases total energy output, bulk strength and detonation temperature and pressure of the explosive but does not greatly affect the velocity of detonation.

More power to the pop: when to use aluminum in bulk explosives

Highlights will include: Orica offers bulk explosives that range from less than half, to almost triple the Relative Bulk Strength of ANFO with additional flexibility in Velocity of Detonation.

Australia : Orica at MINExpo International 2016

31 MPa, even long heating times could not improve the average weld strength beyond [similar to]16 MPa, which is only 65% of the bulk strength of HDPE.

Microwave welding of high density polyethylene using intrinsically conductive polyaniline

Vistis produces over three and a half times the detonation pressure of ANFO at triple the Relative Bulk Strength.

Australia : High energy bulk explosives delivers mining and milling improvements at Mt Rawdon

For each parameter setting, the weld line strength was measured and related to the bulk strength via a weld line factor.