cement slurry

cement slurry

A mixture of cement and water, still in the liquid state; injected into prepacked aggregate or used as a wash over a surface.
McGraw-Hill Dictionary of Architecture and Construction. Copyright © 2003 by McGraw-Hill Companies, Inc.
References in periodicals archive ?
Why is the DENR not chasing after building contractors and developers who while in the process of building are the major contributors for serious levels of dust pollution, run offs of sand, cement slurry, and polluted construction water.
This is often done with a cement slurry, not an easy process.
The main body is constructed of industrial strength, cross-linked polyethylene plastic--five times stronger than conventional polypropylene sheet and resistant to concrete mix or cement slurry build up.
Two simulation models were completed successively in this way; (2) The mixed cement slurry was injected into the first simulated borehole and the mixed expandable slurry with high water content was injected into the second simulated borehole; (3) The two grouted experimental models were cured in the same environment for 5 d.
They may range from cement-based grout slurry such as cement slurry and cement-sodium silicate slurry to chemical slurry such as lignin, acrylic, and urea or epoxy resins [5-9].
These were intertwined and filled the holes in the cement slurry. At the same time, a large amount of granular material was attached to the surface of the cement slurry, and large amounts of acicular ettringite crystals and irregular plate crystals were found.
El-Hosiny [9] studied the effect of adding superplasticizer on the hydration and pore structure of slag cement slurry. Khalil [10] studied the changes in the pore specific surface area and the total porosity of cement pastes that contain different amounts of silica fume that occur with an increase in hydration time.
- Protects against cement slurry during construction
On the basis you paint your house every seven to 10 years, depending on how weather-beaten it gets, I would just mix up a cement slurry 2-1 and brush it into the cracks, leave to it dry, then paint.
It is clearly acknowledged that the inferior fluid loss control cement slurry may be responsible for primary cementing failure due to the excessive density increase or annulus bridging, and the formation invasion by the filtrate of cement slurry may be contaminative to the reservoir.
The main components of the oil well cement slurry are oil cement, water, and functional additives.
It recommended jet grouting, or injecting cement slurry (a mixture of cement, sand and water) through high-pressure pumps, to fill spaces in the sand and stabilize the ground condition.