Investigation and modeling of cutting forces and surface roughness when hard turning of AISI 52100 steel with mixed ceramic tool
: cutting conditions optimization, International Journal of Advanced Manufacturing Technology 77: 1387-1399.
Tool life, surface finish and vibration were studied during machining of nodular cast iron with ceramic tool
. Results shows tool life is minimum with alumina ceramic insert while machining nodular cast iron and concluded that this tool inserts are not useful for cutting nodular cast iron.
Horng et al.,  in their paper focuses on the development of a fast and effective algorithm to determine the optimum manufacturing conditions fortuning Hadfield steel with [Al.sub.2][O.sub.3] /TiC mixed ceramic tool
by coupling the grey relational analysis with the fuzzy logic.
Among specific topics are formation mechanisms of the red spark discharge of micro-arc oxidation, tribological properties of ceramic tool
materials in contact with wood-based materials, the control bearing of pre-tightening force on the guide of a high-speed punch press, technology to reduce noise and vibration in hybrid electric vehicles, and a user-friendly design of a modern forest fire helmet.
Surface roughness model in turning hardened hot work steel using mixed ceramic tool
. Mechanika (Kaunas, Lithuania), 2009, No.
When it drops on the revolving wheel, the ceramic tool
gradually chips the material and creates a groove on the wheel.
RocTool began experimenting with induction heating in 2001, at first casting induction coils into a ceramic tool
with a thin (1 cm) metal skin.
After scoring tile divisions on slab, trace templates with ceramic tool
Tenders are invited for Art brushes, ceramic clay, pyrometric cones, ceramic glazes and underglazes, ceramic tool
sets, block printing ink, india ink, acrylic polymer paints, watercolor paints, enamel spray paint, and tempera paints, modeling compound, crayons, adhesives, markers, oil pastels, colored pencils, drawing pencils, construction paper and art papers.
The tests of straight turning carried out on grade X38CrMoV5-1 steel treated at 50 HRC, machined by a whisker ceramic tool
(insert CC670) enabled us to develop statistical models of cutting force components and surface roughness criteria.
The influence of drop of the ceramic tool
on the surface of the testing sample is crucial.
Tool wear and surface roughness in turning AISI 8620 using coated ceramic tool
. Proceedings of the World Congress on Engineering.