chipping hammer

chipping hammer

[′chip·iŋ ‚ham·ər]
(engineering)
A hand or pneumatic hammer with chisel-shaped or pointed faces used to remove rust and scale from metal surfaces.
References in periodicals archive ?
Attachments include shrouds for grinders and dust extraction attachments that fit around chipping hammer bits and hammer drill bits.
The NDRF team is using special equipment like chipping hammer, rotary rescue saw, spreader cutter and victim locating camera to rescue the victims who are still trapped under the rubble.
ARC WELDER For the advanced DIY fan who is keen on fixing metalwork, it comes with a welding shield, electrode fastener and combined chipping hammer, plus a wire brush.
LaFlamme, 45, a master mechanic, machinist, blacksmith, artist and father of three "When I started, I needed a chipping hammer.
Employees used a chipping hammer to remove the slag from refractory, which was concerning because the refractory material also could have been chipped away.
Later, said Borgnine, a navy investigator studying the Sylph's depth charges "took a chipping hammer and he knocked off about 76 coats of paint and it said 'manufactured in 1917.
A chipping hammer looks like an ordinary hammer except both sides of the head are sharpened up a bit to chip heavy paint off steel.
If you want to cheat a bit, find an old welding chipping hammer with a spiral wire handle.
I would use a chipping hammer and start chipping away at the area where the rust was coming through the plaster until I exposed the actual rebar," Evans says.
A chipping hammer often is used to grind away the sand to leave a clean part.
The tools provided by the contractor to further mark the timber when transporting it must meet the following requirements: - chipping hammer - for standardized plates - made of high-quality steel with weatherproof and size compatible with the plate washer; - holster - filler - to be compatible with the proposed plates; - plate carrying bag - made of durable and wear-resistant material.