The roof, a

circular cone, was a particular challenge to shape.

where ([n.sub.ix],[n.sub.iy],[n.sub.iz]) are the components of the unit normal to the external surface of the PDL (here, the subscripts i = 1 and i = 2 correspond to PDL in the form of a circular paraboloid and hyperboloid, respectively), p is the parameter characterizing the rounding rate of the apex (the tooth root passes through a

circular cone at p = 0); in this case p = 0.4.

Control of the seeker axis was realized by setting its motion on the surface of a

circular cone and on the surface of the unwinding coil.

The length of the

circular cone potential case [L.sub.p] is 1.5 and according to the minimum of experimental normalized density is 0.3.

Solid

circular cone, tetrahedron, homeomorphism, Hausdorff metric, embedding.

The simulation provides differential scattering coefficient, 7hh(0, s) and [[gamma].sub.hv] (0, s) of the

circular cone units.

22###Find surface area of the right

circular cone if radius and###42###37

Visual field of camera is a right

circular cone with the tip angle of 60 [degrees].

A live branch is represented by a right

circular cone, and a dead branch by a cylinder concatenated to the end of the cone (Todoroki 1997).

For a short refresher course in such an arcane subject: As we all should have learned in solid geometry, when we cut a

circular cone crosswise, or orthogonal to the axis, we observe a figure which is a perfect circle.

Furthermore, any plane which cuts the GM cone does so on a convex curve analogous to a segment of a parabolic, elliptic, or hyperbolic plane section of a right

circular cone. A plane which passes through the apex may miss the rest of the cone entirely, may be tangent to it along a generator, or may intersect it in two generators or in only one if the cone is incomplete as is the GM cone.