clamping time

clamping time

The period of time a glued joint must be tightly held during curing.
References in periodicals archive ?
There were no significant differences between two groups in terms of time of surgery, CPB time, the aortic cross clamping time, EF, number of grafts, duration of mechanical ventilation, duration of stay in the ICU, MAP (before anesthesia and 2, 6, 12, 18 and 24 hours after surgery), HR (before anesthesia and 2, 6, 12, 18 and 24 hours after surgery), PH, PaO2 and PCO2 (at 6, 12, 18 and 24 hours after surgery).
Applying SC method abates the duration of valve implantation and clamping time.
You cannot rake it off the second stage, screw recovery time, cooling, or clamping time.
We decided to use a 180-minute WIT to make sure that the blinded veterinary pathologist would find massive necrosis and compare these findings to the other clamping time.
Dong-Hyuk Park, the relationship between cord clamping time and the transfer of stem cells needs to be understood through the early weeks of the perinatal period and the process of 'hematopoiesis,' the formation of blood cells that begins as early as two weeks into pregnancy.
Although longer aortic clamping time increased the risk of cardiovascular events, the protective effect of MC-1 was independent of ischemic time during CABG.
This is true to a lesser degree for estimation of left ventricular ejection fraction, left ventricular hypertrophy, and cross clamping time.
The adhesive/sealant can be used for overhead and vertical bonding, panel holding, or to reduce clamping time typically required of a traditional adhesive/sealant.
The length of clamping time is still primarily a function of the glue," Uhling explains, saying some glues cure in only a minute while others take 20 minutes or more.
Concentric positioning and clamping offer a way to shorten loading and clamping time and provide an important advantage over manual centering in the repeatability that is possible.
bottle, has a short clamping time (clamps need to be left on only 30 to 60 minutes), good tack (meaning it clings well to the material it's applied to) and can be applied in a wide temperature range (40 to 100 degrees F).