Elements of the structure of a coaxial disk shunt of the IIIK-300M2 type in its longitudinal axial section (1--massive internal cylindrical electrode, 2,3--insulating sleeves, 4--massive outer cylindrical electrode, 5--high-resistance steel measuring disk, 6,7--massive insulation disks, 8--a shroud disk, 9,10,12--fastening screws, 11--CP-75 output coaxial connector
, 13--massive clamping ring, 14, 15--respectively input (potential) and output (earthed) bolted shunt connecting elements to high-current discharge circuit of the GCL)
The measurements were made by using a probe adapted from a low-cost open-ended SMA coaxial connector
. The values obtained in a VNA of the reflection coefficient are converted into the real and imaginary part of the complex dielectric permittivity by using theoretical models of the cable's open end.
A two-prong plug goes into the wall (a 220 adapter is provided for European customers), and a coaxial connector
fits into a port in the side of the safe.
The inner conductor of the coaxial connector
is soldered to the line.
As d becomes smaller VSWR in lower frequency band becomes better quickly, however the ridge gap has a lower limit value to be larger than the diameter of the inner conductor of coaxial connector
, the final value for d is chosen as 0.9 mm.
The Endevco model EM46BE comes in a preassembled, precalibrated kit, consisting of the model EM40BE prepolarized free-field microphone and the model EM26CB Isotron preamplifier with Microdot coaxial connector
, both constructed of stainless steel for high durability.
A glass substrate (h = 3 mm, [[epsilon].sub.r] = 7.35) of the type used for car windows is chosen as the dielectric substrate, and the B-PMA is connected to a 50 [OMEGA] coaxial cable through a 50 [OMEGA] coaxial connector
. Here, the core of the coaxial connector
is soldered to the elliptical element, and the outer conductor is soldered to the conducting ground.
San-tron, Inc., has expanded its SMA coaxial connector
line to include seven new field-replaceable SMAs.
The hermetically sealed stainless steel housing minimises loading effects on small or light test structures and terminates with a top mounted 5-44 coaxial connector
The 86C incorporates a coaxial connector
to allow use of coax cable in place of the twisted pair.
Going from a NIST-traceable calibration on a coaxial connector
to the planar PCB transmission line creates loss.