composite board

composite board

A type of hardboard, esp. one fabricated for use in heat insulation.
References in periodicals archive ?
To make sure the bond line can help increase the MOE of quartersawn composite decking boards, end-matched quartersawn lumber should be used to make the composite board for the tests.
Each composite board was cut into test sample (number of specimen for each type of fiber model are 5 samples).
The weight of UPE resin for each composite board was 78 g, and the total weight of five oven-dried fiber mats was also 78 g.
At a hearing in June, the Georgia Composite Board of Medicine tabled proposed rule changes that were restrictive in nature to both Advanced Practice Registered Nurses and physicians who currently practice telemedicine.
The hut-like, indoor-outdoor classroom was built from a special composite board made from recycled plastic and potato chip bags.
The pallet is made from recycled engineered composite board material in combination with a nontoxic environmental composite adhesive material--both of which are composed of 100% recycled wood and/or paper fibers.
The pallet is made from recycled engineered composite board material in combination with a non-toxic environmental composite adhesive material--both of which are composed of 100% recycled wood and/ or paper fibers.
The lab section features an enclosed fume hood workstation by Lab Design, four Monoxivent Mini Arms exhaust vents with clear glass dome hoods, epoxy resin and wood countertops, VCT flooring, composite board cabinets, and steel lockers for parts and materials storage.
The hot-pressing processing of the composite board was similar to that of the particleboard in the lab, which including glue blending, felting, hot-pressing and so on.
In addition, the company maintains manufacturing simulation equipment for: injection molding, blown film, film and sheet extrusion, coextrusion for siding profile and composite board extrusion and injection, extrusion, and multi-layer blow molding.
The lack of conventional dry fiber, such as shavings/sawdust, which will be consumed by biomass competitors, will only put more pressure on composite board mills," he says.
The trend towards using an embossed wood grain on the composite board may mean that a coating will need to be harder and more abrasion resistant in order to avoid both wear on the raised areas of the embossing and excessive dirt pickup in the low areas.