composite plate


Also found in: Wikipedia.

composite plate

[kəm′päz·ət ′plāt]
(metallurgy)
A layer of electrodeposited material consisting of at least two different constituents.
References in periodicals archive ?
Analysis of the buckling behaviour of composite plate. There are two levels to investigate the laminates composite material's mechanical behaviour.
A finite element method based on the classical laminated plate theory is developed for the active vibration control of a composite plate containing distributed piezoelectric sensors and actuators by Lam et al [6], and the static analysis and active vibration suppression of a cantilever composite plate are performed as a numerical example to verify the proposed model.
In the present study, the DKMQ element for analysis of composite plate bending structures [6] is superposed with the standard quadrilateral membrane element (Q4) as shown in Figure 4.
After refinement, the composite plate was modelled with 26,140 elements and the cohesive layer with 940 elements, and 20,916 elements were used to model the bolt.
It is important to mention that, in spite of the polyester brittle fracture, the relatively high amount (30 vol%) of long and continuous curaua fibers sustains the integrity of the composite plate. More than 10 pictures were taken for each distinct material.
Manufacturing Of Composite Plate By Using Hand Lay--Up:
Superabrasives specialist Engis, has developed a new process for polishing Laser grade-quality optical surfaces, which enables materials including: Zinc Selenide, Zinc Sulfide, Germanium, Silicon, Calcium Fluoride and Magnesium Fluoride, to be polished using exactly the same diamond slurry and composite plate combination.
Comprehensive studies on horizontally curved composite plate girders appear to be very limited in the published literature.
For the given geometry of laminated composite plate, as shown in Figure 1, two piezoelectric actuators are symmetrically surface bonded on the top and bottom surfaces of the laminates without considering the adhesive layer affect.
[14] evaluated their SHM system using an artificially introduced delamination in a small composite plate (240 by 240 by 1 mm) between a piezoceramic transducer and FBG located 50 mm apart.
In this research, the behavior of a composite plate graded with carbon nanotube (FG CNTRC), whose surfaces were subjected to thermal and mechanical loads, was investigated based on 3-D theory of elasticity by using Fourier series expansion through state space method.
Murakami, "Laminated composite plate theory with improved in-plane responses," Journal of Applied Mechanics, vol.

Full browser ?