continuity check

continuity check

A test of a line, channel or circuit to determine if the pathway exists from beginning to end and can transmit signals.
References in periodicals archive ?
Additional highlights include real-time continuity check and product pairing using the fibre under test, and workflow optimisation with pass/fail indications and direct report generation.
This is due to the unavailability of an explicit continuity check in both aggregation and merging algorithms.
This typically will generate an "open thermocouple" alarm on the controller and can be diagnosed easily with a continuity check of the thermocouple zone.
The damage precluded a flight control continuity check, but all control cables displayed the uneven individual wire failure locations and broomstrawing associated with an overload failure.
NetOmnia Ethernet Assurance includes features, such as: monitoring of end-to-end metro Ethernet services; carrier class scalability and reliability; service level customer impact; self service customer web portals; support for traffic management/shaping metrics Service level visualization, fault correlation and isolation; support for end to end service quality metrics including Bandwidth Utilization, Frame loss, Delay, Jitter, Availability and Jitter Tolerance; support for Y.1731, MEF and 802.1ad, including continuity check and loopback verification; and support for device, UNI/NNI and EVC (E-Line, E-LAN, E-Tree) related metrics including vendor specific metrics.
Realize that during the week of review, the assistant recorders will perform a continuity check on each eligible member's record going back five years and update things such as missing FITREPs and awards.
A continuity check after it cooled down showed no defects.
Disconnect the grounding wire and run a continuity check on it.
It tested a comprehensive suite of OAM mechanisms, which included BFD continuity check, remote defect indication, LSP Ping on-demand verification and LSP route tracing.
The EX845's true rms meter functions include AC/DC current, voltage, resistance, capacitance, frequency, IR and contact temperature, diode test, and continuity check. A four-digit, 4,000-count backlit display supports data hold, min/max, and selectable auto- or manual-ranging.