c], which characterize dynamics of the leak, were determined using formulas for calculation of dynamic characteristics of electromagnet mechanisms, presented in  and other works, and then in process of modeling they were corrected for obtaining necessary form of the transient control characteristic
Their control characteristic
curve is used as control input for the proportional directional valves of the control block.
It is cog free, hysteresis free, and has a simple two-wire control characteristic
The Don Juan myth, writes Cascardi, |consistently appears to admit a vision of subjective desire, which seems to permit a heterogeneity of objects, and which is open to these risks of self-loss, while at the same time it seems to sacrifice that vision to the demand for cultural order and social control characteristic
of the "traditional" world'.
This results in a 360 [degrees] phase control characteristic
as well as inherently low phase error, since the phase shift is controlled by the angular orientation of the bias field rather than the magnitude of the bias field.
This valve is available with linear control characteristics
and with equal-percentage control characteristics
For the given system with analysed object parameters, control characteristics
of two regulators are presented.
As discussed earlier, the unique nature of pesticide and Bt cotton having damage control characteristics
call for specifying different non-linear functional form for these two inputs.
The use of PAGs in turbines have been approved as it helps the equipment to work under extreme pressure due to its excellent deposit control characteristics
Driver-Cognition-Oriented Optimal To conduct a comprehensive study Control Authority Shifting for of driver attention and cognitive Adaptive Automated Driving control characteristics
when interacting with the vehicle controller to achieve a safe engagement and smooth and swift control-authority shift between the driver and the vehicle controller during adaptive automated driving.
Transient A/F Control Characteristics
of the 5 litre Central Injection Engine, SAE-Nr 81094.
LANEMARK INTERNATIONAL says the excellent control characteristics
associated with its process gas burner technology are increasingly being brought in to sharp focus at Stoke-on-Trent-based Ceramic Drying Systems (CDS).