Also found in: Dictionary, Thesaurus, Medical, Wikipedia.
Related to corundum: Artificial Corundum


corundum (kərŭnˈdəm), mineral, aluminum oxide, Al2O3. The clear varieties are used as gems and the opaque as abrasive materials. Corundum occurs in crystals of the hexagonal system and in masses. It is transparent to opaque and has a vitreous to adamantine luster. The transparent gem varieties are colorless, pink, red, blue, green, yellow, and violet; the common varieties are blue-gray to brown. Emery is a common corundum, used as an abrasive and distinguished by its impurities of magnetite and hematite. The chief corundum gems are the ruby (red) and the sapphire (blue). Yellow, pink, green, and white stones are also called yellow, pink, green, and white sapphires. Corundum gems are also made synthetically. The chief sources of natural corundum are Myanmar, Sri Lanka, India, Thailand, Republic of South Africa, Tanzania, and the United States (North Carolina, Georgia, and Montana). Most of the emery is mined in Naxos and the other Cyclades and in Asia Minor.
The Columbia Electronic Encyclopedia™ Copyright © 2022, Columbia University Press. Licensed from Columbia University Press. All rights reserved.
The following article is from The Great Soviet Encyclopedia (1979). It might be outdated or ideologically biased.



a mineral, a natural anhydrous alumina, Al2O3. Corundum crystallizes in the trigonal system. Its crystal structure consists of aluminum atoms surrounded by six oxygen atoms, which form a highly dense hexagonal packing. The oxygen layers are located parallel to the (0001) face of corundum. The aluminum occupies two-thirds of the octahedral cavities in the packing of the oxygen ions. Corundum is rarely found as large dipyramidal, barrel-shaped, tabular, or rhombohedral crystals; most often it forms, together with other minerals, coarse and fine granular aggregates. Corundum has a hardness of 9 on the mineralogical scale and a density of 3,950–4,100 kg/m3. It is characterized by high chemical stability and high melting point (2020°-2050°PC). The color of corundum varies depending on the composition of the admixtures (Fe, Cr, Ti). The most common colors are gray-brown, pinkish to red, and blue-gray to dark blue.

Corundum is found in silica-deficient igneous rocks (syenites), in anorthite-corundum dikes, in the contacts between syenites and gneisses, in regionally metamorphic rocks (emeries), and in secondary quartzites and desilicated pegmatites.

There are large deposits of corundum in the USSR in Kazakhstan and the Urals. Abroad, there are major deposits in Africa (Malagasy Republic, Southern Rhodesia, Republic of South Africa) and in India, Burma, Sri Lanka, Greece, and Turkey.

Beautifully colored transparent or translucent natural crystals (red, ruby; blue, sapphire; and colorless, leucosapphire) have been used since antiquity as high-quality gems. Granular aggre-gates of nontransparent corundum are used as abrasives in the production of grinding and polishing powders (for polishing and cutting metal, hard rocks, and glass) and as a refractory. Artificial corundum is obtained on an industrial scale by melting bauxite in an electric furnace with a reducing agent (iron filings). It is also used as an abrasive. Cutting tools that are used for the mechanical treatment of metals at high temperatures are made from corundum by the methods of powder metallurgy.

Monocrystalline transparent synthetic corundum in the form of boules and rods is prepared by melting and recrystallizing alumina in an oxygen-hydrogen flame. The boules thus produced may be colored by Cr to red, by V to grayish green in daylight and violet under artificial illumination, by Mn to yellowish pink, by Ni to yellow, and by Ti to pinkish violet. Upon faceting, synthetic corundum is used in jewelry-making under various names, such as sapphire, ruby, topaz, alexandrite, and amethyst. Red corundum, known as ruby, is used as jewel bearings in watches and other precision instruments while corundum rods are used in lasers.

The Great Soviet Encyclopedia, 3rd Edition (1970-1979). © 2010 The Gale Group, Inc. All rights reserved.


Al2O3 A hard mineral occurring in various colors and crystallizing in the hexagonal system; crystals are usually prismatic or in rounded barrel shapes; gem varieties are ruby and sapphire.
McGraw-Hill Dictionary of Scientific & Technical Terms, 6E, Copyright © 2003 by The McGraw-Hill Companies, Inc.


A hard, abrasive mineral, principally aluminum oxide, applied to a surface to make it non-slippery; for example, on the walking surface of a ramp.
McGraw-Hill Dictionary of Architecture and Construction. Copyright © 2003 by McGraw-Hill Companies, Inc.


a white, grey, blue, green, red, yellow, or brown mineral, found in metamorphosed shales and limestones, in veins, and in some igneous rocks. It is used as an abrasive and as gemstone; the red variety is ruby, the blue is sapphire. Composition: aluminium oxide. Formula: Al2O3. Crystal structure: hexagonal (rhombohedral)
Collins Discovery Encyclopedia, 1st edition © HarperCollins Publishers 2005
References in periodicals archive ?
Corundum [Al.sub.2][O.sub.3]--Canadian Shield--Precambrian Rock--Relic Particles This virtual conundrum--a riddle with a pun in its answer--led to more research, and the following inquiries:
The the improvement in the mechanical properties was attributed to the formation of the phases of the ceramic (sillimanite, mullite, corundum, and cristobalite) at high sintering temperature and higher rice husk ash ratios.
Perhaps, this is the conversion period of diaspore to corundum in which dehydroxylation takes place [8].
This pattern corresponds to a highly crystalline material with narrow and well-defined diffraction peaks, which are undoubtedly assignable to the hkl reflections included in the JCPDS file 1-089-7717 of [alpha]-[Al.sub.2][O.sub.3] (corundum).
It can effectively reduce the stress of bottom by substituting for corundum castables in bottom lining.
The [Ti.sub.3]Si[C.sub.2] with 8% of TiC impurities, sliding dryly against corundum, exhibits variant friction coefficient and wear rate of (0.53-0.1) and (0.6-2.5) x[10.sup.-6] [mm.sup.3]/Nm respectively, for a change of sliding speed of 5-60 m/s under normal pressure from 0.1 MPa to 0.8 MPa.
In terms of actual hardness, diamond is four times harder than corundum. How much harder is corundum than topaz?
Bolland, Kilmarnock A Diamonds are the hardest substance on Earth, being four times tougher than the next hardest mineral, corundum, better known as sapphires and rubies.
Date at 3 o'clock, power reserve indicator at 6 o'clock, central seconds hand.Crystal: Sapphire, formed of corundum, 2.5 mm thick, magnifying lens at 3 o'clock.
The interior of the palace was decorated with corundum and jewels and, at night, the palace resembled planets, hence the name Kawkaban.
Roughness parameter values are determined on titanium and titanium alloy surfaces after blasting with glass beads and corundum particles of different sizes as shown in Table 4 [32].