cover coat

In ceramics, the layer of porcelain enamel normally applied over a ground coat.

Mentioned in ?

References in periodicals archive ?

Awards will be presented in the following categories: Equipment: artwork generation; clean room supplies; lamination; drilling; registration and tooling; x-ray verification tools (bare board); routing and scoring; AOI test; electrical test; alternative bare board test; imaging; wet process; surface treatment; plating; final finish; solder mask/legend ink application; marking/tracking; ink jet; water treatment, and air pollution control; PCB Materials and Technologies: laminates; specialty substrate materials (e.g., heat sinks); imaging materials, primary, secondary and specialty; etching; general wet process; general cleaning; surface treatment; plating; final finish; solder mask; legend ink; conductive ink; cover coat; laboratory support products; Software: factory automation software.

PCD&F announces 2017 NPI Awards open

The printing toners are dry powder and the ceramics cover coat can be applied as a dry film in a simple one step lamination process using a conventional pouch laminator.

A new 'mouse trap': Ron Manwiller describes advances in ceramics printing technology

Compression can cause wrinkles in the cover coat on the inside of the bend.

Flex your knowledge: considering these factors will help bend circuits for medical devices

We (the teachers) brushed on a clear cover coat of glaze and retired the Georges to cone 04.

Connecting to Curious George

Glass linings are generally composed of two layers; porous ground coat near the steel substrate and dense cover coat. Pores in the ground coat are designed to moderate the stress mismatch between the steel substrate and GL, and to trap the hydrogen gas and hence contribute to reduce the chipping.

Precursor of hydroigen induced glass lining chipping by AE monitoring

"It cost $50,000 to repair the stucco and put a new cover coat on it," he says.

Ultrasonic sound systems on buildings repel birds harmlessly

Awards will be presented in the following categories: Equipment: artwork generation; clean room supplies; lamination; drilling; registration and tooling; x-ray verification tools (bare board); routing and scoring; AOI; electrical test; alternative bare board test; imaging; wet process; surface treatment; plating; final finish; solder mask/legend ink application; marking/tracking; ink jet; water treatment, and air pollution control; PCB Materials and Technologies: laminates; specialty substrate materials (e.g., heat sinks); imaging materials, primary, secondary and specialty; etching; general wet process; general cleaning; surface treatment; plating; final finish; solder mask; legend ink; conductive ink; cover coat; laboratory support products; Software: factory automation software.

PCD&F opens 2016 NPI Awards

Following the screen-printing process a cover coat of film solution is applied over the entire area.

The ceramic decal: visual diversity and conceptual complexity: Anna Calluori Holcombe and Glen R. Brown discuss the decoration process of ceramic decals

Full browser ?

CITE

Site: Follow: Share:

Open / Close