cross girder

cross girder

Any beam which unites longitudinal girders.
References in periodicals archive ?
Although there are four motors, two axes are taken into consideration on Z-Z direction, one for upper cross girder 4 and one for lower cross girder 5.
Tenders are invited for completion period: Charging corroded% rusled/cracked top flange plate, gusset plate, lateral bracing, bottom main angle, strengthening of cross girder, provision of Protection screen and changing of loDsei%ccrroded rrvets of Bridge No.
Limited Tenders are invited for Repair And Maintainance Of Main Girder And Cross Girder At Ge Engineer Park Suratgarh
Tenders are invited for Changing corroded rusted cracked top flange plate, gusset plate lateral bracing bottom man angle, strengthening of cross girder provision of Protection screen and changing of loose/corroded rivets of Bridge No 253UP, 253DN 2460N, 240DN & 210DN In BRKA-GHO Section under SSS/BR/DHN in Division
Tenders are invited for Changing corroded/rusted/cracked top flange plate, gusset plate, lateral bracing, bottom main angle, strengthening of cross girder, provision of Protection screen and changing of loose/corroded nvets of Bridge No.
Limited Tenders are invited for Repairing Of Cracks Developed In Cross Girder Of Open Web Through Type Steel Girder Bridges
Tenders are invited for Changing corroded/rusted/cracked of top flange plate, bottom main angle, gusset plate, lateral bracing strengthening of cross girder, provision of protection screen and changing of loose rivets of Bridge No.
Tenders are invited for Changing corroded/rustedtaacked top flange plate, gusset plate, lateral bracing, bottom main angle, strengthening of cross girder, provision of Protection screen and changing of IcoseJ corroded rivets of Bridge No.
Tenders are invited for Corrosion, Protection Including In Situ Sand Blasting, Metallising And Painting Of Cross Girder System Of Br.
1383 up between dusi-ponduru section on main line by replacement of 380x100-480 long channels from bottom chord to steel troughs with 380x1 00-630 long to accommodate new additional 40mm bolt and replacement of cleat angle150x100x16-150 long connecting bottom chord to cross girder with 16mm bent plate 300x200-460 long better stability.
Tenders are invited for Providing replacement of hoist plateform chequarred plate, Cross girders, Dial indicator system, wire rope, turn buckle assembly, CDU assembly component & bottom & side rubber seal & providing Enterance gate of spillway &M.