Lafarie-Frenot, Evolution of matrix cracking in cross-ply
CFRP laminates: Differences between mechanical and thermal loadings, 4th International Conference on Durability Analysis of Composite Systems, Brussels, Belgium (2000).
Their scheme maybe iterative, such as the so-called self-consistent methods [19, 20] and the proposed by Barbero [21-23], or departing from an initial set of real-life  or virtual finite element simulations such as the Synergistic Damage Mechanics (SDM) model presented by Singh and Talreja [25-27], which expanded the scope of micromechanical modelling to laminates other than cross-ply
and quasi-isotropic specimens were cut from laminates developed at NASA Armstrong Flight Research Center.
Taking into account the test cycle and cost, according to the former tests, the reasonable tip mass should be 36.6 g for cross-ply
specimens and 22 g for unidirectional specimens.
[28.] Jose, S., et al., Intralaminar fracture toughness of a cross-ply
laminate and its constituent sub-laminates.
The influence parameters of plate aspect ratio, cross-ply
ratio and stiffness ratio on the critical temperature were presented.
Nosier, "Three-dimensional interlaminar stress analysis at free edges of general cross-ply
composite laminates," Materials and Design, vol.
In Tables 2 and 3 we compare the nondimensionalized natural frequencies from the present Murakami theory for various cross-ply
spherical shells, with analytical solutions done by Reddy and Liu  who considered both the first-order (FSDT) and the third-order (HSDT) theories.
Kobayashi, "Experimental characterization of microscopic failure process under quasi-static tension in interleaved and toughness-improved CFRP cross-ply
laminates," Composites Science and Technology, vol.
Topics discussed include parametric analysis of confinement in concrete columns, cross-ply
laminate under static three point bending, tracking fatigue crack growth in aluminum joints, and 3D adaptive remeshing procedures for large deformation problems.
The plant will make cross-ply
tyres for trucks, light and small commercial vehicles and two-wheelers for the local market.
It had those cross-ply
tires on it." Dario smiles and laughs, "Yeah ...