cut plane

cut plane

[′kət ‚plān]
(graphic arts)
The intersection of a plane with a three-dimensional object.
References in periodicals archive ?
It is reasonable to assume that there exist equal and opposite forces perpendicular to the cut plane. Therefore, the internal cutting of the soft tissue is treated as deformation under the influence of the scalpel, and the internal point elements of soft tissue are generally deformed under these forces.
We find the waypoints located within the boundary of the obstacles by calculating the intersection points of cut plane and edges of the obstacle.
SM was defined as the minimum distance (mm) between the achieved cut plane and the boundary of the tumor.
The E-plane of the proposed QMSIW antenna is in [empty set] = 45[degrees] cut plane, where [empty set] is defined as shown in Figure 1(d).
20, the position of the cut plane that goes through the middle of the nose is shown.
Wu urged domestic airlines to cut plane ticket prices for cross-Taiwan Strait direct flights, since they will bring windfall to those companies, threatening to resort to strong administrative measures should those airlines refuse to do so.
We rotate these tumors into a uniformly chosen random orientation and then we find the largest diameters in the cut plane. Our virtual measurements are performed on the geometric objects; we do not represent the objects as a series of CT slices.
In the sample where there is a partial razor-cut (figure 5d) and then tom through, the torn through portion of the silicone cross-section is relatively smooth compared to the adhesive flow-front and runs offat an obtuse angle somewhat transverse to the cut plane and away from the stress riser presented by the razor-slit plane.
"This geometric combination results in a lower cut plane, which permits the production of a raised flange," the company says.
This results in a lower cut plane, permitting production of a raised flange.
5) Temperature gradient represented temperature difference of 457[degrees]C at perpendicular distance 12 mm from cut plane. The numerical simulation will use inverse heat transfer problem.
Meanwhile airport operator BAA has announced plans to cut plane passenger queues by improving security facilities.