cutter bar


Also found in: Dictionary.

cutter bar

[′kəd·ər ‚bär]
(mechanical engineering)
The bar that supports the cutting tool in a lathe or other machine.
McGraw-Hill Dictionary of Scientific & Technical Terms, 6E, Copyright © 2003 by The McGraw-Hill Companies, Inc.
Mentioned in ?
References in periodicals archive ?
For safety in stationary threshing, the intake reel and both cutter bars should be disconnected, a fairly simple task.
The pruning saw heads on small models incorporate a cutter bar, which severs the bark ensuring that there are no tears.
The tunnel boring machine (TBM) featuring a carbide cutter bar was modified from its original diameter for completing Section I of the tunnel.
Some crops, such as coastal bermuda grass in the South, have to be cut very close, thus creating stress on the cutter bar and header, Verhulst said.
The combine reel was removed, a vertical cutter bar was installed and the combine was towed from shock to shock.
At harvest time, the combine separated the wheat grain from the chaff much in the same way as the modern harvester, but the cutter bar was only 6 feet wide.
The P-CUT cutter bar, which can be operated at a reduced speed of 850 rpm, is protected by the SAFETY LINK module and a hydraulic collision protection device that lifts the mower over obstacles.
Multiple cutter bars provide enhanced mixing and a robotically applied carbide hard-faced leading edge improves cutter bar longevity.
The second vivid memory was the importance of the correct tension of the chain on the cutter bar.
The full cutting action of a four-pin spider rotor is designed to increase throughput in cutter bar and anvil machines.