bonding

(redirected from dentin bonding)
Also found in: Dictionary, Thesaurus, Medical, Financial.

bonding:

see insuranceinsurance
or assurance,
device for indemnifying or guaranteeing an individual against loss. Reimbursement is made from a fund to which many individuals exposed to the same risk have contributed certain specified amounts, called premiums.
..... Click the link for more information.
.

Bonding

 

with regard to textile materials, the joining and fastening of materials with threads and glue or under pressure after glazing of the joining surface of one of the materials. Most often, two fabrics (synthetic, wool, metallized, or cotton fabrics) are glued together, or one surface of polyurethane foam is glazed and joined under pressure with a fabric or knitted material. Bonding gives textile materials new properties, such as water or light impermeability or crease resistance. Bonded materials are used to make men’s, women’s, and children’s overcoats, suits, and special-purpose clothing.

bonding

[′bän·diŋ]
(chemistry)
The joining together of atoms to form molecules or crystalline salts.
(electricity)
The use of low-resistance material to connect electrically a chassis, metal shield cans, cable shielding braid, and other supposedly equipotential points to eliminate undesirable electrical interaction resulting from high-impedance paths between them.
(engineering)
The fastening together of two components of a device by means of adhesives, as in anchoring the copper foil of printed wiring to an insulating baseboard.
(psychology)
The formation of an emotional attachment between two people whose identities are significantly affected by their mutual interactions.
(textiles)
The joining of two fabrics, usually a face fabric and a lining fabric.

Bonding

The act of connecting the various structural metal parts of a metal enclosure or vehicle (as in an aircraft or automobile) so that these parts form a continuous electrical unit. Bonding serves to minimize or eliminate interference, such as that caused by ignition systems. It also prevents buildup of static electricity on one part of the structure, which can, by subsequent discharge to other parts, cause static interference. Bonding is achieved by bolting the parts together in such a way as to achieve good electrical contact or by connecting them with heavy copper cables or straps.

Bonding also refers to the fastening together of two pieces by means of adhesives, as in anchoring the copper foil of printed wiring to an insulating baseboard. See Adhesive

bonding

1. The connecting together of all the electrical grounds in a system to eliminate differences in ground potential between them.
2. The interconnecting of cable sheaths and sheaths of adjacent conductors so there is no potential difference between the metal parts which are grounded.
3. The connecting of a gas pipe system to an acceptable grounding electrode as specified by the National Electrical Code or other applicable code.

bonding

The act of connecting all metal parts of the aircraft to secure good electrical continuity and so avoid the undesirable effects of static electricity.

bonding

Tying two or more devices together to function as one. See channel bonding, G.bond and ISDN.
References in periodicals archive ?
Cytotoxicity of recent dentin bonding agents on mouse fibroblast cells.
This emphasizes the importance of the integrity of collagen fibrils left after acid etching and the quality of the hybrid layer (intermingling of adhesive resin with collagen fibrils) in dentin bonding [29].
Hakki, "Cytotoxicity evaluation of dentin bonding agents by dentin barrier test on 3-dimensional pulp cells," Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology and Endodontology, vol.
Deep dentin fluoridation of the pulp floor was performed with "dentin bonding agent" (dentin sealant liquid), "Humanchemie", Germany.
Water sorption/solubility of seal-etching dentin bonding agents.
The effect of load cycling on the nanoleakage of dentin bonding systems.
Effects of chemical cross-linkers on caries-affected dentin bonding. J Dent Res.
(1) The physical mechanism of the process is achieved by the application of dentin desensitizing agents such as dentin bonding agents, composite resins, glass ionomer cements (GICs) and varnishes.
The previous studies that have analyzed the effect of Zn salts on dentin bonding have added ZnO [21, 23-25], Zn[N.sub.3] [22], Zn-methacrylate [21], and Zn[Cl.sub.2] [23, 24, 28], inside commercially available [22-25] or experimental adhesive systems [21].
(18.) Tasanee Tengrungsun, Worawan Sangkla Comparative study in desensitizing efficacy using the GaAl As laser and dentin bonding agent.
Comparative study of sealing ability of two root end filling materials with and without the use of dentin bonding agents.