depth micrometer

depth micrometer

[′depth mī′kräm·əd·ər]
(design engineering)
A micrometer used to measure the depths of holes, slots, and distances of shoulders and projections.
References in periodicals archive ?
2 is the groove depth and is found by measuring the depth of the groove with a dial caliper or depth micrometer using the probe function in the normal manner.
Custom-made calibrated stainless steel die (Depth micrometer).
Since the boxes were heavy, rather than haul the parts upstairs to the QC lab the quality person took the depth micrometer down to the dock and began to perform a final inspection on this critical dimension.
A recessed head cylinder will require both feeler gauges and depth micrometer. The barrel-to-cylinder gap may show a small increase but usually it remains in spec.
Soldiers in the field must use a depth micrometer to correctly take and calculate the wheel end's shim thickness.
The sections of the pipeline were located in a shop, where initial detailed manual measurements with a depth micrometer were carried out.
Tenders are invited for purchase of equipments Depth Gauge 150 mm, Mitutoyo make Micrometer (0-25mm), Mitutoyo Bevel Protractor, Mitutoyo Depth Micrometer, Mitutoyo Feeler Gauge 0.05-1 mm, Mitutoyo Surface finish tester,Plug Gauge 3mm, Mitutoyo Thread Gauge (0.01-10mm), Measurement using Profile Projector, Radical model RPP 250 etc.
Using a depth micrometer or the depth-recording stem on your caliper, measure from the side of the slide to the side of the sight base on each side of the slide.
Tenders are invited for Digimatic Depth Micrometer Interchangeable Rod Type , Specn.- Range: 0-300 Mm, Resulation: 0.001 Mm, Make: Mitutoyo Or Becker
Limited Tenders are invited for Procurement Of Depth Micrometer.
Tenders are invited for Depth Micrometer, Range 0-4 Inch, Least Count 0.001 Inch Similar To Mitutoyo Model No.
Tenders are invited for Depth Micrometer Ratchet Stop Type Range: 0-3 Inch, Graduation: 0.001 Inch, Base: 4 Inch X 0.63 Inch, Measuring Rods: 3, Mitutoyo Code No.