Nickel films were electrodeposited from the electrolyte containing 0.1 mol/L nickel sulfate, 0.01 mol/L nickel chloride, 0.05 mol/L boric acid, and 0.3756 mol/L
diethanolamine at the deposition potential of 1.3 V.
Sunflower oil (30 g) was mixed with
diethanolamine (25 g) in a beaker.
The plate was washed with PBS, and buffered substrate (1 g/L p-nitrophenyl phosphate in
diethanolamine buffer) was added.
To grow NiO NSs on the ZnO NR surface, the Ni seed solution was first prepared by mixing nickel acetate tetrahydrate (Ni([OCOC[H.sub.3]).sub.2] x 4[H.sub.2]O, Sigma-Aldrich) with 2-methoxyethanol (C[H.sub.3]OC[H.sub.2]C[H.sb.2]OH, Sigma-Aldrich) and
diethanolamine ([HN(C[H.sub.2]C[H.sub.2]OH).sub.2], Sigma-Aldrich) under continuous magnetic stirring at 70[degrees]C for 2 h.
The reason is that cocamide MIPA was chosen because it has no free
diethanolamine, whereas cocamide MEA contains trace amounts of
diethanolamine which can be unacceptable to some consumers.
Cleavage after 60 h (b) Amine-containing nucleophile (a) % Ethanolamine 28
Diethanolamine 17 Tris[hydroxymethyl]aminomethane 14 Ethylenediamine 8 Hydroxylamine Complex destroyed Hydrazine Complex destroyed (a) The concentration of the nucleophiles was 0.1 mol/L, respectively.
In another previous work, we achieved depolymerization of PET with
diethanolamine at high pressure and high temperature in the presence of xylene for the first time.
As-prepared samples were further ground into fine powder and mixed with
diethanolamine and ethanol to form a paste with a weight ratio of 100 : 10 : 10.
Diethanolamine methoxycinnamate is no longer a permitted UV filter for human sunscreen drugs in the US.
Four chemicals (coconut oil
diethanolamine,
diethanolamine, N-methyloacrylamide, and methylphenidate) were negative in the transgenic models and the NTP rat bioassay.
PYD immunoassay reagents, including PYD-coated microplates, monoclonal anti-PYD alkaline phosphatase conjugate, PYD calibrators, controls, wash buffer, substrate,
diethanolamine buffer, and stop solution, were obtained from Metra Biosystems, Inc.
Such An Absorption-Resorption Heat Pump With Co2/Amine As A Working Fluid Pair Has Been Calculated To Have An Efficiency Of 151 % And 187 % For Diglycolamine And
Diethanolamine Respectively, With Waste Heat At 0 Degree C, Delivered Heat Between 35 - 75 Degrees C And A Generator Temperature Of 180 Degrees C.
