A discharge valve
has been developed for use with the company's cryogenic grinding HD-01 laboratory attritor.
Union Process, known globally as a manufacturer of particle size reduction and dispersing equipment, as well as a supplier of grinding media and laboratory services for a broad range of research and industrial applications, has developed a special discharge valve
for use with its cryogenic grinding HD-01 Laboratory Attritor.
stainless steel model equipped with all wash-down components including the motor, safety limit switch, variable frequency drive, stuffing boxes and knife gate discharge valve
. The dust-tight cover includes a charging port with safety grating and the U-shaped trough is surrounded by a 100-psi ASME-stamped jacket for heating/cooling.
It has a 6-inch debris discharge valve
for quickly off-loading liquid materials by gravity or under pressure to another container.
The slant of the cone helps material slide down to the discharge valve
Eventually, the pressure inside the cylinder exceeds the pressure in the discharge chamber [p.sub.d], and the discharge valve
is forced to open.
Located at the base of the loader body, the discharge assembly efficiently controls the flow of materials with a pneumatically driven, positive-seal discharge valve
that prevents vacuum leaks associated with flapper valves.
Additionally, the UltimaPro can be equipped with several features to optimize the containment of toxic products: the product feed and discharge valve
can be equipped with Buck high containment split butterfly valves and, on request, even with isolator boxes.
The RPZ design features triple security to provide optimum protection against back pressure and back siphonage: two check valves and a discharge valve
divide the unit into three chambers, each providing a separate pressure zone.
The fluid velocity vector in discharge valve
is presented in figure 6.
Included as standard features are many components that were once offered as optional features, including reverse vertical lift to raise the mix can to mixing position, self contained explosion proof control panel, single point hook-up, variable speed control and inverter duty motors, jacketed mix can with discharge valve
and thermocouple inside of mix can.
For example; a built-in relief valve to prevent pump damage in the event of the discharge valve
becoming blocked during operation and a built-in drain valve to facilitate easy priming.