Artificial media fabricated using lumped and distributed circuit
elements can be used to produce the NGD effect.
The performance of the new method is verified with the single resonance lumped circuit model and multi-resonance distributed circuit
model, which can obtain more accurate results than the target impedance method.
The first seven chapters examine transmission line response in terms of voltage and current using distributed circuit
On the other hand, distributed circuit
elements are very well understood and at high frequencies their size is less of a penalty because of the reduced wavelengths.
Simulations began with the basic symmetrical distributed circuit
using m-derived terminating half sections at the input(s) and output(s) as well as the idle ports.
Optimization of component values was needed to account for their parasitic and distributed circuit
The use of a distributed circuit
for modeling and quantifying the equivalent circuit parameters of a Gunn VCO or oscillator at mm-wavelengths is unsatisfactory due to uncertainties incurred in de-embedding the parameter values from measured data in such a circuit, and due to their limited frequency range or validity.
6 mm and uses the distributed circuit
architecture to achieve very uniform gain over a broad bandwidth.
The Cooper Emergency Power Control (CEPC) is designed for sites with distributed circuits
or fixtures that are switched or dimmable and require emergency control.
It exploits the familiarity such students have with circuits and treats transmission lines as distributed circuits
Chapter 3 begins with a discussion of distributed circuits
and the construction of a solution to the transmission line equation and ends with a description of the Smith chart and its application to the analysis of transmission line circuits.