drying oven

drying oven

[′drī·iŋ ‚əv·ən]
(engineering)
A closed chamber for drying an object by heating at relatively low temperatures.
McGraw-Hill Dictionary of Scientific & Technical Terms, 6E, Copyright © 2003 by The McGraw-Hill Companies, Inc.
References in periodicals archive ?
A conveyorized mold drying oven with a production rate of 3,000 lbs.
New equipment includes: an Alexanderwerk Roller Compactor; an IMA Precisa capsule weight checker; a 400 kg O'Hara Tray Drying oven; a Korsch XL 400 Tablet Press with bilayer module; a Glatt GPCG 2/5 Fluid Bed Processor; an O'Hara Aqueous Film Coater with 18" and 30" interchangeable pans; and a 5L Becomix Counter sweep vessel.
The 'shuttles' are then pulled across to the track in front of the drying oven. To prevent 'shuttles' being pushed off the end of the track, interlocking devices are built into the overhead track.
The product range includes devices such as heating oven, incubator, sterilizer, vacuum drying oven, Peltier-cooled incubator, CO2 incubator, humidity chamber, constant climate chamber, climatic test chamber, temperature test chamber, storage chamber, waterbath and oilbath.
Also, it provides users an alternative to the drying oven method, which requires analytical balances with 0.1-mg resolution.
Coatings which are applied to extruded rubber pieces are said to be dried efficiently and quickly in the company's drying oven.
The method that takes the least amount of time and equipment and still gives a crisp chip is using a very hot (475 degrees or higher) oven or a desiccator (a drying oven).
Glenro has developed an infrared drying oven with integral airflow and exhaust that dries water-based adhesive on polystyrene sheets prior to a laminating operation at 40 feet per minute.
The coater features a three-zone drying oven, along with capability for corona treatment of films and UV curing.
The Stromboli Karl Fischer sample changer is also available with drying oven for use with titrators.
has developed a drying oven system which the company says reduces the time and space required for drying coated parts by 33%.