edge connector

(redirected from edge connectors)

edge connector

[′ej kə‚nek·tər]
(electronics)
A row of etched lines on the edge of a printed circuit board that is inserted into a slot to establish a connection with another printed circuit board.

edge connector

The protruding part of an expansion card that is inserted into an expansion slot. It contains a series of printed lines that go to and come from the circuits on the board. The number of lines (pins) and the width and depth of the lines are different on the various interfaces (ISA, EISA, PCI, Micro Channel, etc.).


Edge Connector
Edge connectors are very popular because they are "printed" onto the outer layers of the board in the same process that creates the circuit lines.








Plug In Cartridges
Edge connectors provide a simple connection mechanism for cartridges such as these educational programs for preschoolers.
References in periodicals archive ?
Rebuilding flat roof consisting of primer, vapor barrier, insulation gap, enemas, edge connectors approximately 595 m.
Sullins Connector Solutions (San Marcos, CA) has added a full series of double-row, dual edge connectors specifically engineered to facilitate board-to-board extensions.
Sullins' Dual Edge Connectors feature a current rating of 3 A per contact and a contact resistance of 30 m[ohm] maximum.
Other typical reasons for using fixturing include instances where the board edge clearance is not to SMEMA standards, or if components hang over the edge of the board, as in edge connectors.
Using pulsed heat technology, it provides targeted heating and precision temperature control for such components as flex circuits, ribbon cables, wires, SMT components, single or dual sided edge connectors, and thermocompression bonding of gold ribbon.
Edge connectors and the like are creeping ever closer to the cliff, thus having a huge impact on board handling techniques and, ultimately, product yield.
Electrical, automotive, and appliance uses include plugs, edge connectors, and parts subject to mechanical stress such as gear plates.
All components are industrially hardened in sealed metal cases with no card edge connectors, heat exchangers or air conditioning required.
Lot 1 wall and ceiling with wooden acoustic elements 1600 m suspended ceilings from slotted White Fir acoustic elements;: - 65 m curtain wall coverings slotted White Fir acoustic elements;: - 360 m facings wall / ceiling from slotted White Fir acoustic elements;: - 80 m light rust from White Fir Leimholzleisten;: - 315 m Substructure timber carrier 8/20 with attachments;: - Each C1 / A and C4 / D with edge connectors, mounting parts and skeleton position.
Using pulsed heat technology, the Uniflow3 provides targeted heating and precision temperature control for flex circuits, ribbon cables, wires, SMT components, single or dual sided edge connectors and thermocompression bonding of gold ribbon.
Provide a method for joining flexible circuits, edge connectors, ribbon cables and PCMCIA connectors to PCBs or substrates.