(redirected from electrical switch)
Also found in: Dictionary, Thesaurus, Medical, Legal, Financial, Wikipedia.


electrical device having two states: on, or closed; and off, or open. Ideally a switch offers a zero impedanceimpedance,
in electricity, measure in ohms of the degree to which an electric circuit resists the flow of electric current when a voltage is impressed across its terminals.
..... Click the link for more information.
 to a current when it is closed, and it offers infinite impedance when open. Mechanical switches, which operate by moving contacts together and apart, are often classified by the number of connections they can make or break at once and the number of closed positions in which they can be placed. A single-pole double-throw switch can be placed in either of two closed positions, making one connection in each position. A double-pole single-throw switch can open or close two connections at once. For many operations, as in computers and digital telecommunications, the operation of mechanical switches is too slow and transistorstransistor,
three-terminal, solid-state electronic device used for amplification and switching. It is the solid-state analog to the triode electron tube; the transistor has replaced the electron tube for virtually all common applications.
..... Click the link for more information.
 are used instead. The PIN diodediode
, two-terminal electronic device that permits current flow predominantly in only one direction. Most diodes are semiconductor devices; diode electron tubes are now used only for a few specialized applications.
..... Click the link for more information.
, which contains an intermediate intrinsic layer between the n-type and p-type layers, is also used as a simple switch. This device, which normally acts as a conductor, acts as a strong dielectric when the intrinsic layer is reverse biased. See relayrelay,
electromechanical switch operated by a flow of electricity in one circuit and controlling the flow of electricity in another circuit. A relay consists basically of an electromagnet with a soft iron bar, called an armature, held close to it.
..... Click the link for more information.


See J. C. McDonald, Fundamentals of Digital Switching (1990).


In electrical work, a device for closing, opening, or changing the connections of the circuit in which it is placed.



a device that selects the required output circuit (or circuits) and connects to it an input circuit (or circuits) by means of connection, disconnection, or commutation. The selection may be manual or automatic, following a program stated in terms of a time or state function of other electric circuits. Switches are a component of more complex data-transmission equipment used in telemechanics and communications engineering, and they are used to solve programming and control problems in computer technology and to connect circuits in electric machines.

A distinction is made among electromechanical, electronic, and electron-beam switches. The simplest electromechanical switches are knife switches, commutators of electric machines, and sets of electromagnetic relays or electromechanical selectors. More complex switches are electronic devices assembled according to definite functional schemes; they may include ionic devices, electron tubes, semiconductor devices, and electron-tube commutators, as well as gas-discharge tubes and circulators (for ultrahigh frequencies).


(computer science)
A hardware or programmed device for indicating that one of several alternative states or conditions have been chosen, or to interchange or exchange two data items.
A symbol used to indicate a branch point, or a set of instructions to condition a branch.
(civil engineering)
A device for enabling a railway car to pass from one track to another.
The junction of two tracks.
A manual or mechanically actuated device for making, breaking, or changing the connections in an electric circuit. Also known as electric switch. Symbolized SW.


A device used to open or close an electric circuit or to change the connection of a circuit.


1. a mechanical, electrical, electronic, or optical device for opening or closing a circuit or for diverting energy from one part of a circuit to another
2. the tassel-like tip of the tail of cattle and certain other animals
3. any of various card games in which the suit is changed during play
4. US and Canadian a railway siding
5. US and Canadian a railway point








(1) In programming, a bit or byte used to keep track of some event. The term is sometimes synonymous with the branch command.

(2) In programming, a statement that saves the programmer from having to write multiple compare statements. See event loop.

(3) A modifier of a command. For example, in the Windows/DOS command dir /p the /p is a switch that modifies the Dir command to pause after each screenful. See Dir.

(4) (SWITCH) A line of LED light bulbs from SWITCH Lighting (www.switchlightingco.com). See LED lighting.

(5) A mechanism that allows each key to be depressed on a keyboard. See mechanical keyboard.

(6) A mechanical or electronic device that directs the flow of electrical or optical signals from one side to the other. Switches with more than two ports, such as a LAN switch or PBX, are able to route traffic. See LAN switch, softswitch, PBX, data switch and transistor.

With regard to a simple on/off switch, remember... Open is "off." Closed is "on."

Mechanical and Semiconductor Switches
The semiconductor switch (transistor) performs the same function as a light switch on the wall. Instead of being manually closed, the switch is electronically closed by pulsing the semiconductor material, which makes it conduct.

A Manual Switch
This early switch panel from New York Electric Switchboard Company was used to manually open and close electric lines.
References in periodicals archive ?
Tenders are invited for Supply And Replacement Of Electrical Switch Gear And Electrical Accessories Etc.
Tenders are invited for Replacement for faulty electrical switch gear at te jamalpur and te haweli kharagpur under munger ssa.
C Plinths for Transformers and VCB, Curb Walls, earth pits, raising roof and flooring to existing electrical switch gear room at 33/3.
Tenders are invited for replacing the east high service pumping motor control and the electrical switch gear.
Every intersection of wires can then form an electrical switch, which could be programmed to configure the crossbar to perform various functions, such as store a bit or perform a logic operation.
Tenders are invited for Painting work in U/G for Electrical Equipment, Fencing of Sub Station, Electrical Switch etc for awareness regarding Safety for Preparation Boards and Letter Writing in Nehar

Full browser ?