electrically connected

electrically connected

[i′lek·trə·klē kə′nek·təd]
(electricity)
Connected by means of a conducting path, or through a capacitor, as distinguished from connection merely through electromagnetic induction.
References in periodicals archive ?
An etching gas, C4F8 enables semiconductor manufacturers to cut chip patterns at leading-edge dimensions and also create the conduits through which several chips can be electrically connected.
The rotor consists of windings (generally on a core), the windings being electrically connected to the commutator.
It means that all the flat panels are electrically connected to the frame, so that--in many applications earthing straps are no longer needed.
The buried pipelines are generally electrically connected with other underground metal structures in stations, such as grounding systems made of bare metal, which affect the current distribution and protection effects.
They then opened the access panel where the pylon mates to the aircraft and found that the pylon was not electrically connected to the aircraft.
In the primary mushroom-type HIS, all metal patches with grounding vias are electrically connected, while the adjacent patches shall be electrically separated to introduce DC bias voltages.
The market for offline gravity filters has immense potential in rural Indian market place where villages are not electrically connected,” said Mr.
The system they report in the paper consists of a square array of 100 electrode disks, electrically connected in parallel.
Bare chip components are typically mounted to a printed circuit board or substrate using die-attach adhesives, and then electrically connected to the board, substrate or directly to another chip through fine wires in a process known as wire bonding.
To overcome the first of these major challenges-that the silicon used to fabricate visible imagers is blind to infrared light-infrared-sensitive crystals must be electrically connected to each of the 16 million pixels.
Because of their nanosize, quantum dots can be used in solar cells if they can be electrically connected to conductors.
These LED arrays are either electrically connected in a parallel-series arrangement, or in several series strings of (typical three in series), each with their own power resistor and diode bias connected in parallel to construct the overall RCL.

Full browser ?