bonding

(redirected from enamel bonding)
Also found in: Dictionary, Thesaurus, Medical, Financial.

bonding:

see insuranceinsurance
or assurance,
device for indemnifying or guaranteeing an individual against loss. Reimbursement is made from a fund to which many individuals exposed to the same risk have contributed certain specified amounts, called premiums.
..... Click the link for more information.
.
The Columbia Electronic Encyclopedia™ Copyright © 2013, Columbia University Press. Licensed from Columbia University Press. All rights reserved. www.cc.columbia.edu/cu/cup/
The following article is from The Great Soviet Encyclopedia (1979). It might be outdated or ideologically biased.

Bonding

 

with regard to textile materials, the joining and fastening of materials with threads and glue or under pressure after glazing of the joining surface of one of the materials. Most often, two fabrics (synthetic, wool, metallized, or cotton fabrics) are glued together, or one surface of polyurethane foam is glazed and joined under pressure with a fabric or knitted material. Bonding gives textile materials new properties, such as water or light impermeability or crease resistance. Bonded materials are used to make men’s, women’s, and children’s overcoats, suits, and special-purpose clothing.

The Great Soviet Encyclopedia, 3rd Edition (1970-1979). © 2010 The Gale Group, Inc. All rights reserved.

bonding

[′bän·diŋ]
(chemistry)
The joining together of atoms to form molecules or crystalline salts.
(electricity)
The use of low-resistance material to connect electrically a chassis, metal shield cans, cable shielding braid, and other supposedly equipotential points to eliminate undesirable electrical interaction resulting from high-impedance paths between them.
(engineering)
The fastening together of two components of a device by means of adhesives, as in anchoring the copper foil of printed wiring to an insulating baseboard.
(psychology)
The formation of an emotional attachment between two people whose identities are significantly affected by their mutual interactions.
(textiles)
The joining of two fabrics, usually a face fabric and a lining fabric.
McGraw-Hill Dictionary of Scientific & Technical Terms, 6E, Copyright © 2003 by The McGraw-Hill Companies, Inc.

Bonding

The act of connecting the various structural metal parts of a metal enclosure or vehicle (as in an aircraft or automobile) so that these parts form a continuous electrical unit. Bonding serves to minimize or eliminate interference, such as that caused by ignition systems. It also prevents buildup of static electricity on one part of the structure, which can, by subsequent discharge to other parts, cause static interference. Bonding is achieved by bolting the parts together in such a way as to achieve good electrical contact or by connecting them with heavy copper cables or straps.

Bonding also refers to the fastening together of two pieces by means of adhesives, as in anchoring the copper foil of printed wiring to an insulating baseboard. See Adhesive

McGraw-Hill Concise Encyclopedia of Engineering. © 2002 by The McGraw-Hill Companies, Inc.

bonding

1. The connecting together of all the electrical grounds in a system to eliminate differences in ground potential between them.
2. The interconnecting of cable sheaths and sheaths of adjacent conductors so there is no potential difference between the metal parts which are grounded.
3. The connecting of a gas pipe system to an acceptable grounding electrode as specified by the National Electrical Code or other applicable code.
McGraw-Hill Dictionary of Architecture and Construction. Copyright © 2003 by McGraw-Hill Companies, Inc.

bonding

The act of connecting all metal parts of the aircraft to secure good electrical continuity and so avoid the undesirable effects of static electricity.
An Illustrated Dictionary of Aviation Copyright © 2005 by The McGraw-Hill Companies, Inc. All rights reserved

bonding

Tying two or more devices together to function as one. See channel bonding, G.bond and ISDN.
Copyright © 1981-2019 by The Computer Language Company Inc. All Rights reserved. THIS DEFINITION IS FOR PERSONAL USE ONLY. All other reproduction is strictly prohibited without permission from the publisher.
References in periodicals archive ?
Enamel bonding agent was used here and others have suggested using dentine bonding under FS, when moisture contamination is likely.
Durability of enamel bonding using two-step self-etch systems on ground and unground enamel.
It is advisable to preserve the enamel during full crown preparation in teeth affected with dental erosion, since the enamel bonding to composite or porcelain restoration is predicable and long-lasting in comparison to dentin [32].